Strapping Equipment

SAMUEL

ACME

POLYCHEM

STRAYPACK

SAMUEL

SAMUEL P715YM STRAPPING MACHINE

 

The Samuel P715YM Stainless Automatic Strapping Machine delivers a High Performance Operation built in a frame that can withstand the harshest environments.

 

The frame covers and many of the critical components are made from stainless steel or other water proof materials. The cabinet is fully enclosed and sealed for protection from the environment. The P715YM is the ideal machine choice for Poultry, Meat and Seafood Packaging.

 

The latest high speed operating system boasts a speed of up to 50 cycles per minute, while working with 30% fewer moving parts than others. The seal engine design is permanently lubricated, for years of trouble free operation.

SAMUEL 702BS STRAPPING MACHINE

The Samuel Model P702BS Fully Automatic Strapping Machine features high operating speeds combined with heavy duty structural designs to use in the most demanding applications. The P702BS also features a stainless steel frame, body and covers for use in cold, wet environments.

 

The P702BS may be the most operator friendly strapping machine in its class. It features automatic strap loading, automatic strap ejector when the coil runs out and loop ejector when cycled without a package present.

 

The heavy duty wide belt conveyor design is hinged for easy access to the seal engine when needed. A safety switch is included to cut electrical power when opened, and restore power again when closed.

Brochures & Resources

Samuel P702BS Strapping Machine

SAMUEL P715 STRAPPING MACHINE

 

The P715 combines a heavy duty frame design with the high operating speeds and precision strap placement of many of the newer machines. It features several proven designs that make it the most operator friendly machine in its class.

 

The operator control panel is located on the table top of the machine for easy access. A diagnostics display monitors the electrical operating system for instant solutions should a problem arise.

 

The three motor seal engine design provides a high level of performance while greatly reducing the number of moving parts when compared to other machines. The proven track design assures precise parallel strap placements at high speed.

 

The P715 features an outside mount dispenser for fast auto strap loading. The dispenser can be adjusted to work with 8×8 coils or 9×8 coils. The machine can be set up to operate with 5mm, 6mm (1/4”), 3/8” or ½” machine grade Polypropylene strapping.

Brochures & Resources

Samuel P715 Strapping Machine

SAMUEL P702B STRAPPING MACHINE

 

The Samuel Model P702B Fully Automatic Strapping Machine features high operating speeds combined with heavy duty structural designs, allowing it to be used in the most demanding applications.

 

The operator control panel offers easy access to any machine function and includes an LCD display showing machine operation status and maintenance diagnostics.

 

The P702B may be the most operator friendly strapping machine in its class. It features automatic strap loading, automatic strap ejector when the coil runs out and a loop ejector when it is cycled without a package present.

 

The heavy duty, wide-belt conveyor design is hinged for easy access to the seal engine when needed. A safety switch is included to cut electrical power when opened, and restore power again when closed.

SAMUEL P702-59 STRAPPING MACHINE

 

The P702 is a world class high speed automatic strapping machine. It features several creative designs that make it the most operator friendly machine it its class.

 

The operator control panel is hinged to allow access from enhanced diagnostics and the ability to make adjustments.

 

The compact frame of the P702-59 features an inside mount strap dispenser that hinges up for auto strap loading at knob makes coil changes faster.

 

All P702 series machines have a hinged open top plate for easy access to the strapping head. They also feature quick release feed guides for immediate access to the strap feed system with the need for tools.

SAMUEL P714 STRAPPING MACHINE

 

The P714 is a value packed semi automatic strapping machine with features found on more expensive machines.

 

The strap cycle is fast and quiet. The all electric seal engine has fewer moving parts than others and will provide consistent tension and seal results with less maintenance.

 

The unique dual tension system can be set for a either a slow gentle pull or for a standard fast tensioning cycle.

 

This portable lightweight strapping machine is reinforced at the table top to support heavy packages without trouble.

 

  • Electronic Seal Head Design
  • Fast and Quiet Operation
  • Electronic Tension Control
  • Unique Dual Tension Mode
  • 45 Second Start Up
  • Fewer Moving Parts than Similar Strapping Machines
  • Reinforced Table Support
  • Portable, Locking Casters

SAMUEL P626-726 STRAPPING MACHINE

 

  • Automatic motor shut-off if not used within 60 seconds. Offers instant resumption of operation when needed.
  • Heater blade reaches operating temperature in just 5 seconds and maintains an optimum operation level thereafter.
  • Easy PC board replacement. All operating functions such as strap feed, strap tension and heater bar temperatures are controlled by a printed circuit board. In the event of a circuit failure, replacement is a quick and easy operation.
  • High speed transmission with electromagnetic clutch, allows for excellent performance of only 1.5 per second cycle, providing less wearing components, for better reliability and longevity.
  • Capacitor start motor reduces the ”start” current of the motor to prevent overheating.
  • Unique heater elements avoids electric leakage, short circuits and lengthens the life of the heater blade.
  • Adjustable package guides ensure positioning accuracy of package over sealing head.
  • Accepts strap sizes 1/4”, 3/8”,or 1/2” with no additional parts required.
  • Through the use of an outside adjustable knob the strap tension can be adjusted up to 132 pounds without the need to open the top cover.
  • Low voltage control circuit for operator safety
  • Note: Model P626E and P726E have electrically controlled tension

SAMUEL P205 STRAPPING MACHINE

 

The P205 is the most versatile Table Top Strapping Machine in its class. The heavy duty seal engine is an innovative new design that can produce more tension than comparable machine models. The electric tension and strap weld controls are similar to those found on much higher priced automatic machines. The temperature and cooling delay can be set to allow for precise results with most polypro-pylene and polyester strapping. This portable 110 volt machine comes with adjustable table height and locking casters. The reinforced welded steel frame and table top will hold up in very demanding applications. The controls are simple to use and allow for quick, precise strapping to any product tting its application range. The external electrical tension dial can be easily changed to apply the desired tension. The strapping will feed out a pre-determined amount after each cycle is com-pleted. A simple dial adjustment will set the length, and repeat each time. Additional strapping can be dispensed by activating the strap feed pushbutton. A reset pushbutton returns the machine to its starting position.

SAMUEL P100 STRAPPER

 

The P100 Trackless Strapping Machine is Samuel’s most versatile and economical strapping machine. Completely portable and very compact, this table top style strapping machine requires only six feet of floor space, yet can strap virtually any shape or size of product bundle or package that can be placed on the machine. The P100 is made to handle a wide variety of packaging applications including: corrugated cartons, lumber, metal and plastic tubing, paper, as well as soft, fragile packages or materials. It is especially productive for low volume applications without sacrificing efficiency and reliability. The P100 will automatically tension, heat seal, cut the strap, and immediately pre-feed for the next application. The P100 Strapping Machine: trackless, versatile and economical!

 

The P100 is a trackless, automatic feed, completely portable, strapping machine that is made for low volume applications. The operator positions the package using the simple, but accurate adjustable stops. Strap feed can be adjusted to consistently pre-feed the desired length of strap. A simple tug on the strap-end will release additional strap for the occasional larger package. The strap is positioned around the package and inserted into the strapping head. The P100 does the rest.

 

The strap tension on the P100 easily adjusts up to 150 Ibs (667N). The strap operation permits application of up to 16 polypropylene straps per minute. In addition, quick changeover from one strap size (1/4” (6mm).

Brochures & Resources

SAMUEL P100 STRAPPING MACHINE

SAMUEL P 702

 

  • Up to 60 Straps per Minute
  • 12 mm Polypropylene Strapping
  • High Performance DC Brushless Motor Technology
  • Precision Electronic Tension up to 100 lbs Loop Ejector
  • Coil End Strap Ejector
  • Anti Jam Technology
  • Auto Strap Loading at Waist Height Foot Bar, Photo Eye and Panel Switchare
  • Standard on All Machines
  • Track Design Insures Precision Strap Placement
  • Roller Table Tops on 33” Wide Sizes and Up

ACME

ACME SMG15

ACME SMG 25

 

  • Up to 70 cycles per minute
  • Simple to operate
  • Easy to maintain
  • Consistent tension levels

POLYCHEM

POLYCHEM PC 600 AL

Features

  • Lubrication free sealing mechanism
  • Cycle start standard options —foot switch, push button or table top ball switch
  • Capable of up to 25 straps/minute
  • Simple, centralized controls
  • Portable on casters
  • Available in 3/8″ (9mm) & 1/2″ (12mm) strap on 8″x8″ or 9″x8″ core size
  • Table Height = 31-1/2″
  • Hinged, easily removable stainless steel table top with rollers, standard
  • Automatic re-feed mechanism
  • Weld-Cool switch for highly compressible packages or very rigid packages that need high tension
  • Automatic strap loading
  • Loop ejector to eject accidentally actuated straps

Specifications

  • Min. Package Size: 6″ wide, 2″ high
  • Max. Package Size: within arch size
  • Max. Tension: 180 lbs.
  • Speed: 2.5 seconds/cycle
  • Strap Sizes: 3/8″,1/2″ polypropylene
  • Metric: 9, 12mm polypropylene
  • Core Sizes: 8″x8″ or 9″x8″
  • Electrical Supply: 110 VAC – standard
  • 440 VAC – 3 PH – optional
  • 220 VAC – 3 PH – optional

Brochures & Resources

POLYCHEM PC600AL BROCHURE

POLYCHEM PC101

Features

  • CE safety standard design
  • Safety switch
  • Reliable P.C. board electric control
  • Hinge type table
  • Rigid caster with brake
  • Reel unit is core size adjustable design for 8″, 9″, & 11″ diameter

Specifications

  • Strapping Speed: 2.5 sec/strap (60Hz)
  • Tension: 30-90 lbs.
  • Sealing Method: Heating element
  • Strap Sizes: 1/4″, 3/8″,1/2″, 5/8″ polypropylene; Metric: 6, 9, 12, 15.5mm polypropylene
  • Core Sizes: 8″x8″, 9″x8″, 11″x8″*
  • Reel Outside Dia.: 19″
  • Power: AC 110, 60Hz, 1PH
  • Power Consumption: 0.57KW
  • Table Height: 30″
  • Machine Weight: 220 lbs.
  • Layout Dimension: 29-1/2″H x 36-1/4″W x 23″D

Brochures & Resources

POLYCHEM PC 101 STRAPPER BROCHURE

POLYCHEM PC102 SEMI-AUTOMATIC STRAPPER

Features

  • CE safety standard design
  • Safety switch
  • Reliable P.C. board electric control
  • Hinge type table
  • Rigid caster with brake
  • Reel unit is core size adjustable design for 8″, 9″, & 11″ diameter

Specifications

  • Strapping Speed: 2.5 sec/strap (60Hz)
  • Tension: 30-90 lbs.
  • Sealing Method: Heating element
  • Strap Sizes: 1/4″, 3/8″,1/2″, 5/8″ polypropylene; Metric: 6, 9, 12, 15.5mm polypropylene
  • Core Sizes: 8″x8″, 9″x8″, 11″x8″*
  • Reel Outside Dia.: 19″
  • Power: AC 110, 60Hz, 1PH
  • Power Consumption: 0.57KW
  • Table Height: 30″ (adjustable)
  • Machine Weight: 185 lbs.
  • Layout Dimension: 29-1/2″H x 36-1/4″W x 23″D

Brochures & Resources

POLYCHEM PC 101 STRAPPER BROCHURE

POLYCHEM AUTOMATIC STRAPPING MACHINE PC550

POLYCHEM AUTOMATIC STRAPPING MACHINE GP-33C

Brochures & Resources

POLYCHEM AUTOMATIC STRAPPING MACHINE GP-44

Brochures & Resources

POLYCHEM SEMI-AUTOMATIC STRAPPING MACHINE PC 650RPS

Features

  • Easy to understand control panel with centralized start button. Insert the strap into the machine and the machine does the rest
  • Bayonet automatically extends through pallet void and dispenses the desired amount of the strap
  • Bayonet automatically retracts when strapping cycle is complete
  • Easy to load coil location with waist level strap threading
  • Retractable bayonet reduces floor space, improves maneuverability and reduces the chance of damage
  • Extra large 6″ rubber casters provide the ultimate in maneuverability

Specifications

  • Min. Load Height: 24″
  • Strapping Speed: 2.5 second/strap (60Hz)
  • Tension: 30-90 lbs.
  • Sealing Method: Heating element
  • Strap Sizes: 3/8″,1/2″, 5/8″ polypropylene or polyester; Metric: 9, 12, 15.5mm polypropylene or polyester
  • Strap Thickness: Up to .030″
  • Core Sizes: 16″x6″ standard; 8″x8″ or 9″x8″ optional
  • Voltage: 110 VAC 60 Hz
  • Weight: 650 lbs.
  • A minimum 3-1/2″ pallet void is required with a max 3/4″ base pallet board
  • Strap Bayonet Max. Ext. 39″

Brochures & Resources

POLYCHEM PC650 RPS

POLYCHEM PC 1000

Features

  • Cycle Speed is up to 65 straps per minute (depending on arch size)
  • German DC brushless motor technology (stepper motors)
  • No belt, clutches, or pulleys. 30% fewer parts, less maintenance and items to go wrong
  • Waist high quick chance coil and strap feed
  • Easy access Operating Control Panel
  • Front Foot-Bar Pedal plus movable foot switch
  • One piece strap chute
  • Sensor controlled heater
  • End of coil strap ejector/loop ejector
  • Electronic Brake
  • Adjustable table height from 32″ to 36″
  • Lockable Casters
  • Choice of arch sizes

Specifications

  • Cycle Rate: Up to 65 straps per minute depending on arch and package size
  • Package Weight: Up to 100 lbs.
  • Strap Tension: Up to 100 lbs.
  • Polypropylene Strap: 1/4″, 3/8″, 1/2″; Metric: 5mm, 6mm, 7mm, 9mm, 12mm
  • Electrical Requirements: 110V 60Hz 1 Phase
  • Shipping Weight: 450 lbs.

Brochures & Resources

POLYCHEM PC1000

POLYCHEM SV5000 AUTOMATIC STRAPPER

 

Features

  • Capable up to 55 straps/minute
  • PLC controlled with diagnostics
  • Electronic reel brake
  • Electronic tensioning
  • Servo Motor Technology
  • Loop ejector
  • Long life heater blade
  • Power saving system, motor runs only during cycle
  • Easy access strap path (no tools)
  • Auto refeed
  • Choice of arch sizes & strap widths

Brochures & Resources

POLYCHEM SVS 5000C BROCHURE

CORRUGATED SHEETS

 

Corrugated sheets provide a durable, thin layer of protection between product layers during palletizing and shipping.

 

  • Protects products from forklift damage.
  • Keeps top of products free from warehouse dust.
  • Helps to disperse weight.
corrugated sheets

Slip Sheets

 

Provide a protective barrier to separate and protect items with slip sheets.

Benefits

  • Reduce transportation weight and cost
  • Maximize warehouse space
  • Increase product protection
  • Reduce damage
  • Save storage space
  • Decrease freight cost
  • Safer to use
  • Fewer failures
  • Moisture resistant
  • Longer life span

Industries That Use Slip Sheets

  • Food manufacturers and distributors
  • Pet foods
  • Electronics
  • Retail
  • Home improvement
Slip Sheets

Master Cartons

 

  • Save on UPS orders by combining several packages.
  • Corrugated cartons are all 100% recyclable.
  • These cartons are specifically designed to be Master Packs for our most popular small cube cartons for freight consolidation.
  • No need for additional void fill – a Perfect fit every time.

L x W x D

8 3/4 x 4 3/8 x 9 1/2″
12 3/4 x 6 3/8 x 13 1/2″
12 3/4 x 12 3/4 x 13 1/2″
25 1/8 x 8 3/8 x 17 1/2″

HOLDS

4 pack 4 x 4 x 4″
4 Pack 6 x 6 x 6″
8 Pack 6 x 6 x 6″
6 Pack 8 x 8 x 8″

master cartons

Insulated Shippers and Cold Packs

Insulated Shippers

Reliable for maintaining the insulation and integrity of your product! Any products that present unique shipping difficulties due to temperature constraints can be shipped safely.

 

Economical — shippers are lightweight, reusable and recylcable!

 

Shipper includes:

  • Seamless molded EPS foam body
  • Tight fitting lid
  • 200# / 32ect white corrugated carton

Cold Packs

Keep perishables at a constant and desirable temperature for days, or extend your shipping times. The ultimate in refrigerant packs.

 

  • Tested and shown to be the coldest and best gel refrigerant available.
  •  Leak proof, reusable and economical to use.
  • Specifically formulated with food safe, non-toxic materials that stay colder than ice.

Re-Freez Cold Packs

The Refrigerator in a Bag!

RE-FREEZ-R-BRIX™ is a block of rigid foam that holds its shape frozen or thawed and is reusable. These refrigerants are non-toxic, sealed in a heavy plastic pouch, and are rated the best in foam refrigerants. Other products just don’t compare.

 

  • Protect from warming… Keeps perishables requiring a temperature range of 32°F to 60°F at a safe, uniform cool temperature for over 14 days.
  • Prevent thawing… Keeps frozen products chilled for an extended period of time.
  • Protects against freezing… When packaged in properly insulated containers, warmed RE-FREEZ-R-BRIX release heat, keeping perishables from freezing.
insulated box

Bulk Cargo Containers

 

Protect and conceal your large shipments with bulk cargo containers.

 

  • Easy to pack.
  • Protect irregularly shaped shipments.
  • Many standard air freight containers available.
  • Makes a great master pack for smaller cartons.
L x W x D DESCRIPTION
30 x 17 x 17″ “EO” Air Cargo Container – 350# DW / 51ECT
36 x 22 x 22″ “EH” Air Cargo Container -350# / 51ECT DW
41 x 28 3/4 x 25 1/2″ “E” Air Cargo Container – 350# / 51ECT DW Max Load Capacity: 600 lbs
48 x 40 x 36″ 200# / 32 ECT Must Buy 25 to Receive 25 Column Pricing
48 x 40 x 5″ 200# / 32 ECT Gaylord Lid – Must Buy 25 for 25 Column Pricing
48 x 40 x 36″ 275# DW / 48 ECT Heavy Duty Double-Wall Must Buy 25 to Receive 25 Column Pricing
48 x 40 x 36″ 275# DW / 48 ECT Double-Wall Gaylord – Must Buy 25 for 25 Column Price
48 x 40 x 5″ 275# / 44 ECT Heavy Duty Gaylord Lid
58 x 41 x 45″ “D” Air Cargo Container, includes pallet Max Load Capacity: 1200 lbs
Bulk Cargo Containers

STRAYPACK

Strapack AQ-7

 

The AQ-7 is an economical version of the RQ-8 strapping machine with the ability to reliably run 5mm and 6mm strapping, assuring perfect strap placement and alignment. Consistent tension is applied with a tension arm system. The AQ-7 features the same lubrication-free operation as the RQ-8. Using cost-efficient 3-phase power, the motors run only when necessary. Capable of 27 straps per minute, the AQ-7 offers proven reliability and durability at an affordable price.

Straypak AQ 7

Strapack D 53X2

 

Utilizing two DC direct drives, the D-53X2 is faster than its predecessors. The microprocessor has been upgraded to improve tension control. Tension is applied with a steel wheel allowing application of high tension without scuffing the strap. Tension is easily adjusted from 4.4 lbs to 88 lbs or 2 to 40kg making the D-53X2 a versatile strapping machine.

Strapack D53

Strapack JK 5

 

StraPack’s affordable JK-5 is designed to bring the productivity, speed, and ergonomics of arch strapping machines to those who have wanted an arch machine but have not been able to justify the cost. With 110 Volt power supply, simple strap width adjustment from 5mm to 12mm, up to 27 straps per minute speed, auto re-feed, loop ejection, a patented strap dispensing system, and small footprint, the JK-5 can be used virtually anywhere. At an affordable price, UPS & FedEx shippers, first-class mailers, small to medium size manufacturing concerns, and those customers that must have a strapping machine at multiple workstations can afford to own the JK-5.

Straypack JK 5

Strapack JK 5000

 

StraPack’s JK-5 has been improved considerably and transformed into the JK-5000 with the same affordability. The JK-5000 can achieve up to 37 straps/minute, while maintaining all the benefits of the JK-5, such as a 110 Volt power supply, simple strap width adjustment from 5mm to 15.5mm (5/8in), auto re-feed, loop ejection and small footprint. Another new feature to the JK-5000 is a self-diagnostic programmable microprocessor which continuously monitors critical electrical functions. Should an electrical problem arise, the monitoring panel immediately displays the function affected to take the guess work out of troubleshooting, making restoration more efficient.

straypak 5000

Strapack RQ 7000

 

The high-speed sealing head can strap up to 70 bundles per minute without sacrificing any strap tension. The space-efficient Reel Unit design simply slides out from the inside of the body cabinet making strap coil loading easy. The reel rotation is stopped by an electromagnetic Reel Brake instead of a mechanical brake. When the strap coil runs out, the machine will automatically eject any remaining strap from inside the machine saving the operator the time and hassle of clearing out the strap by hand. The exclusive Tension Motor eliminates wear parts such as an interlock shaft, tension belt, and pulley for maintenance-free performance.

Straypak 7000

Strapack RQ 8000

 

The RQ8000 is the evolution of one of strapack’s most popular and longest selling models, the RQ-8. Offering a higher strapping speed, as well an integrated foot bar, height adjustment and a built in cycle counter, the RQ8000 reinforces the market leading position of the RQ-8 series machines.

Straypak rq8000

Strapack SQ 800

 

Introducing StraPack’s new line of strapping machine, the SQ-800 with brushless DC motor. The SQ-800 provides better efficiency without compromising the reliability of the legendary RQ-8x.

Standard strapping rate is 55 straps/min, even when tension is applied. The machine is ready to operate in less than 25 seconds, contributing to increased packaging line efficiencies.

The SQ-800 offers different modes of tensioning system which can be selected according to the application requirements. A wide range of tension is available via a digitally controlled tension dial.  Tension capability is up to 80kgf or 176lbf (equivalent of 150mm or 6” stroke). Unlike many other machines in the market, tension does not compromise the cycle speed.

Strapack F-18FB

 

A fully automated model of the F-18, the F-18FB allows for easy integration to existing productions lines. The smaller sealing head allows for packages as small as W100 × H50 × L150 mm (W4 x H2 x L6 in). Optional photo-eye sensors can also allow a customization of a variety of strap placements. Standard self-correcting features also apply, making the F-18FB the perfect choice for a reliable and low maintenance operation.

Straypak F18FB

Strapack RQ-8A

 

The RQ-8A is available in 2, 3, 4, 5 and 6 tabletop belt configurations to match various package sizes. (Roller conveyor version also available). The conveyor speed is variable, up to 29.4 m or 98 feet per minute on standard machines and as an option the speed can be increased to 40 m or 132 feet per minute. An inverter system makes it safe and easy to adjust the belt speed. The standard RQ-8A allows selection of 0, 1 or 2 straps. Optional automation packages are available to provide a variety of automatic strap placements. The standard RQ-8A also features self-correcting technologies vital in fully automatic applications, such as three-time auto re-feed, loop ejection, and the integrated, self-diagnostic monitoring system. When customer satisfaction depends on reliable operation and low maintenance, the RQ-8A is the perfect choice.

Straypak RQ 8A

Strapack AQ 7M

 

In the moisture-laden environments of poultry, meat and seafood processing, the AQ-7M is the most durable strapping machine available. All the parts on the AQ-7M are made of stainless steel or water-resistant materials. The bottom of the cabinet is reinforced to provide extra protection where moisture exposure is greatest. An internal heat lamp assists in evaporating whatever moisture accumulates inside the machine. The sealing head is side mounted to protect it from moisture and residue. The AQ-7M can strap boxes as small as 80mm or 3 1/8″ high. The roller table height is adjustable and can be removed to fit the AQ-7M into an existing conveyor system. Tension arm system on the AQ-7M assures positive and accurate tensioning of damp strapping. Available in fully automatic configurations.

Straypak AQ 7M

Strapack D53 M2

 

D-53M2 employs the same strapping head as the D-53 with a body primarily constructed from stainless steel. The internal components are made of stainless steel or steel with a rust resistant coating. The strap dispenser is located on top of the machine to protect the strap in the wet and harsh environments. The D-53M2 is the perfect machine for low volume applications in the meat and seafood industry.

Straypak D53M2