Case Sealers

BB-2/SSBOTTOM BELT CASE TAPER

IDEAL FOR WASHDOWN CONDITIONS

Stainless steel construction coupled with a single drive washdown motor and aggressive drive belts make BB-2/SS ideal for wash down conditions.

BB-2 BOTTOM BELT CASE TAPER

COST-EFFECTIVE CASE SEALING

BB-2 features self-centering side rails, a rugged bottom belt drive, and heavy-duty mast that easily adjusts to handle a variety of case sizes at a cost-effective price.

WEXXAR WSH

The WSH is a fully automatic hot melt glue case sealer. The WSH fully automatic hot melt glue case sealer are compact, versatile case sealers for top seal only or for top and bottom seals. Stationary major flap folding and internal platen-compression system ensures perfectly butt-jointed and aligned flaps.

When you need a durable case sealer to ensure that products are secure for shipping, the Wexxar WSH is the perfect solution. Using a hot melt glue adhesion, your cases will be tightly sealed for maximum performance.

In each WSH hot melt glue case sealer, Wexxar has incorporated advanced technology to provide power for heavy loads without being rough on products. Using the WSH, you’ll see that your products are precisely handled without harm or damage. This case sealer machine has a compact footprint to save space in production lines. With a corrosion resistant finish, a variety of industries can use the WSH without fear of harm to product. Features on this equipment include non-contacting sensors, integrated controls, and safety lockout.

Wexxar WSH Hot Melt Glue Case Sealer Features & Specs:

• Heavy duty compliant side drive belt transport through the machine: gentle to the product yet powerful enough for the heaviest loads
• Excellent accessibility for operation, set-up and service with convenient centrally mounted electrical controls and adjustability from both sides
• Interlocked safety guarding
• Corrosion resistant finished throughout
• Equipped with choice of Nordson or ITW Dynatec hot melt system
• Space saving compact footprint
• PLC (Programmable Logic Controls) equipped

Standard Features on All Wexxar Machines:

• Pin & Dome: As flat case blank is injected into the two facing plates, the pins goes into the flutes and the dome pinches the corrugated tightly. The two plates then open to 90 degrees to perfectly square the case. Since no compressed air is used in this process, it greatly decreases contamination and is more durable than vacuum cups which can clog and wear.
• Safety & Ergonomic Features: Floor level tending reduces strain; every machine Wexxar builds is fully guarded from in-feed to out-feed, interlocked safety guarding throughout the machine; easily accessed control and assemblies; palm e-switches located on both sides.
• Dynamic Flap Folding: Wexxar case formers have a dynamic flap folding system. As long plow rails aren’t used, the overall length of the machine is significantly more compact.
• Compliant Drive Belt: Each of the two facing unidrive drive belts is mounted on a spring mechanism. This allows a constant pressure to be exerted on the case, despite normal variations in case width. Even heavy cases are handled carefully and with great control.
• Non-Contacting Sensors: Proximity sensors are able to have a much greater operating lifetime and don’t cause jams than contacting sensors.
• In-Line Operation: By keeping the intake and outflow of the machine in line with the rest of the line, aisles are kept free, safety is improved and space is saved.
• Simplicity of Construction: By planning through each step in the construction of the machine and its materials, Wexxar is able to greatly reduce potential problems.
• Small Footprint: Compact operations allows Wexxar’s machine to fit into virtually any application and production line.
• Integrated Controls: Connecting each machine in the full production line through common equipment and protocols reduces complexity and problems while increasing overall control.
• Tagout/Lockout: When a machine is locked out, it cannot be operated until all the safety features are in place.
• Paint-Free Construction: No paint: no contaminating flakes, no extra maintenance required.
• UL-Listed Electrical Panels: Wexxar meets or exceeds all standards, requirements and specifications
• NEMA Electrical Specifications: Wexxar meets or exceeds all standards, requirements and specifications
• Regional Service Available: Through Wexxar’s operating partnership with 10 other Pro Mach companies, there are factory trained service specialists available across North America.

WEXXAR BEL 270

The BEL 270 is a fully automatic uniform hot melt glue case sealer. It is a continuous duty hot melt glue case sealer unmatched for compactness, quality of construction, safety and operating performance. At 58 inches (1,473mm) in length the BEL 270 is the most compact automatic hot melt glue case sealer available.

Corrosion resistant, heavy duty construction anodized high tensile aluminum, plated steel, stainless steel and engineering grade plastics ensure that BEL machines stand up to the most demanding production environments. BEL automatic case sealers feature BEL’s Snap Folder safe flap folding technology.

This revolutionary new design protects the safety of personnel by eliminating the traditional “flap-kicker” which can cause serious injury. The BEL 270 hot melt glue case sealer is user-friendly and very simple to operate. A case size change can be completed from either side of the machine in under one minute using two hand wheel adjustments.

The BEL 270 fully automatic hot melt case sealer can be fitted with all popular brands of hot melt glue application systems. BEL’s unique static compression system provides quick uniform bonding of adhesive for positive case sealing at speeds up to twenty-five cases per minute. The system seals cases with a gap free top closure on regular RSC cases providing superior dust and light hold out qualities.

The BEL 270 hot melt glue case sealer can also be configured to run lower cost Gap Flap style, as well as FOL-Bag in box style cases.

BEL 270 Hot Melt Glue Case Sealer Features & Specs:

• Adjustable box stand
• A-42 Rotary Accumulation Turntable
• Total Lock Caster Wheels with Extension Adjustment
• Roller Conveyor for Infeed & Outfeed
• Flexible Conveyor
• Spare Parts Kits for Machine Maintenance
• S-10 Packing Conveyor with Programmable Weigh Scale
• ErgoLevel Packing Height Adjustment Option

Components

• 1″ Heavy Duty Acme Screws
• Motor and Gear Reducer
• C Channel Aluminum Frame
• Magnetic Motor Starter
• Snap Folder
• Uni-Drive

BEL products are ideal for packaging lines that do not warrant full automation because of specific requirements like:

• Frequent case size changes
• Many different case sizes and pack configurations
• Limited floor space
• Manual inspection of the products
• Limited technical staff
• The high price of automated case packers and erectors
• Low volume

WEXXAR WST

The WST is a fully automatic, pressure sensitive tape case sealer. It is a compact, versatile case sealer for top seal only or top and bottom seal.

The WST is heavy duty compliant to accommodate a variety of industries. When your products require pressure sensitive case sealing, the WST is the perfect solution. Providing quality case sealing equipment, Wexxar’s WST works hard to give you a fast, easy manufacturing experience.

Designed for speed and precision, the WST seals a wide range of case sizes with machine adjustments made in five minutes or less. Enjoy features on this equipment that provide your cases with safe, effective sealing. Not only will your products benefit from the WST, so will your production lines. By keeping the intake and outflow of this machine in line with the rest of the line, aisles are kept free, safety is improved, and space is saved. With a small footprint, using this equipment is easy and safe.

Wexxar WST Pressure Sensitive Case Sealer Features & Specs:

• Heavy duty compliant side belt drive transport through the machine: gentle to the product yet powerful enough for the heaviest loads
• Excellent accessibility for operation, setup and service with convenient centrally mounted electrical controls and adjustability from both sides
• Interlocked safety guarding
• Corrosion resistant finish throughout
• Equipped with Dekka stainless steel 2″ tape heads (optionally available with 3″ tape heads)
• Compact footprint
• Seals a wide range of case sizes with machine adjustments made in 5 minutes or less

Standard Features on All Wexxar Machines:

• Pin & Dome: As flat case blank is injected into the two facing plates, the pins goes into the flutes and the dome pinches the corrugated tightly. The two plates then open to 90 degrees to perfectly square the case. Since no compressed air is used in this process, it greatly decreases contamination and is more durable than vacuum cups which can clog and wear.
• Safety & Ergonomic Features: Floor level tending reduces strain; every machine Wexxar builds is fully guarded from in-feed to out-feed, interlocked safety guarding throughout the machine; easily accessed control and assemblies; palm e-switches located on both sides.
• Dynamic Flap Folding: Wexxar case formers have a dynamic flap folding system. As long plow rails aren’t used, the overall length of the machine is significantly more compact.
• Compliant Drive Belt: Each of the two facing unidrive drive belts is mounted on a spring mechanism. This allows a constant pressure to be exerted on the case, despite normal variations in case width. Even heavy cases are handled carefully and with great control.
• Non-Contacting Sensors: Proximity sensors are able to have a much greater operating lifetime and don’t cause jams than contacting sensors.
• In-Line Operation: By keeping the intake and outflow of the machine in line with the rest of the line, aisles are kept free, safety is improved and space is saved.
• Simplicity of Construction: By planning through each step in the construction of the machine and its materials, Wexxar is able to greatly reduce potential problems.
• Small Footprint: Compact operations allows Wexxar’s machine to fit into virtually any application and production line.
• Integrated Controls: Connecting each machine in the full production line through common equipment and protocols reduces complexity and problems while increasing overall control.
• Tagout/Lockout: When a machine is locked out, it cannot be operated until all the safety features are in place.
• Paint-Free Construction: No paint: no contaminating flakes, no extra maintenance required.
• UL-Listed Electrical Panels: Wexxar meets or exceeds all standards, requirements and specifications
• NEMA Electrical Specifications: Wexxar meets or exceeds all standards, requirements and specifications
• Regional Service Available: Through Wexxar’s operating partnership with 10 other Pro Mach companies, there are factory trained service specialists available across North America.

WEXXAR BEL 150X

The BEL 150X is an oversized, uniform, pressure sensitive, semi-automatic case taper. The BEL 150X oversized model has all the quality features of the BEL 150 pressure sensitive case taper with the added bonus of a larger frame and drive system for large case capacity.

The BEL 150X semi-automatic uniform case taper is user-friendly enabling the operator to make box size changes from either side of the machine in 30 seconds or less.

BEL 150X Pressure Sensitive Case Taper Features & Specs:

• Speed: 30 cases per minute (CPM)
• Quick case size changes
• Uni-Drive case transport system
• DEKKA High Performance tape heads
• Modular design allows for a customized BEL system delivered to you at an off-the-shelf lead time and price

Options

• Adjustable box stand
• A-42 Rotary Accumulation Turntable
• Total Lock Caster Wheels with Extension Adjustment
• Roller Conveyor for Infeed & Outfeed
• Flexible Conveyor
• Spare Parts Kits for Machine Maintenance
• S-10 Packing Conveyor with Programmable Weigh Scale
• ErgoLevel Packing Height Adjustment Option

Components

• 1″ Heavy Duty Acme Screws
• Motor and Gear Reducer
• C Channel Aluminum Frame
• Dekka Tape Head
• Magnetic Motor Starter
• Uni-Drive

BEL products are ideal for packaging lines that do not warrant full automation because of specific requirements like:

• Frequent case size changes
• Many different case sizes and pack configurations
• Limited floor space
• Manual inspection of the products
• Limited technical staff
• The high price of automated case packers and erectors
• Low volume

WEXXAR BEL 180

The BEL 180 automatically adjusts for cases that vary randomly in both width and height when they are presented to the sealer. The height and width adjusting mechanisms have locking movements for safety in case of sudden air loss. The adjustments can also be fixed in position for sealing a series of uniform size cases. Cases are taped top and bottom with either 2″ or 3″ wide tape using Dekka stainless steel tape heads.

BEL 180 Semi-Automatic Random Case Taper Features & Specs:

• Converts to a uniform case sealer with one button that locks the height and width into position
• Tilt-out tape head for quick, easy tape roll changes
• Built-in safety features that prevent accidental restarts and guard against operator contact with moving parts
• Stainless-steel machine frame, electrical enclosure, arch, and case transport rollers
• Dual HP side belt drive gear motors
• Conveyor belt and assembly parts are mounted on top and easily accessible, making changes and adjustments simple

WEXXAR BEL 130

The BEL 130 is a quick change, semi-automatic, pressure sensitive, uniform case taper. It is a sturdy, quality built semi-automatic bottom belt case taper designed for simple and convenient tape application. Equipped with state of the art DEKKA High Performance tape heads and quick 30 second size changes, the BEL 130 semi-automatic case taper can seal a wide range of case sizes at speeds up to 30 cases per minute. The BEL 130 pressure sensitive case taper is an ideal choice for packagers presently hand taping cases but wishing to automate at a practical investment cost.

BEL 130 Pressure Sensitive Case Taper Features & Specs:

• Speed: 30 cases per minute (CPM)
• 30 second size changes
• Can run a wide range of case sizes
• DEKKA High Performance tape heads
• Modular design allows for a customized BEL system delivered to you at an off-the-shelf lead time and price

Options:

• Adjustable box stand
• A-42 Rotary Accumulation Turntable
• Total Lock Caster Wheels with Extension Adjustment
• Roller Conveyor for Infeed & Outfeed
• Flexible Conveyor
• Spare Parts Kits for Machine Maintenance
• S-10 Packing Conveyor with Programmable Weigh Scale
• ErgoLevel Packing Height Adjustment Option

Components:

• Motor and Gear Reducer
• Dekka Tape Head
• Magnetic Motor Starter

BEL products are ideal for packaging lines that do not warrant full automation because of specific requirements like:

• Frequent case size changes
• Many different case sizes and pack configurations
• Limited floor space
• Manual inspection of the products
• Limited technical staff
• The high price of automated case packers and erectors
• Low volume

WEXXAR BEL 185

The BEL 185 is a semi-automatic random top & bottom case sealer. It conveniently self-adjusts and applies pressure-sensitive tape to various size cases, providing improved productivity in case sealing lines. Ideal for continuous, multiple-size case operations, the BEL 185 case sealer automatically sizes independently to each case, eliminating the need for manual adjustments.

The BEL 185 semi-automatic, pressure sensitive, random case taper allows one person to link case forming, case packing, and case sealing of corrugated cases into a single operation. It also converts to a fixed position sealer for uniform case sizes. The superior performance and safety provisions of the BEL 185 offers operator comfort and increased productivity above that of similar case sealers.

The BEL 185 is equipped with DEKKA High Performance stainless steel tape heads. With the design and construction will deliver years of reliable, low maintenance performance.

BEL 185 Pressure Sensitive Case Taper Features & Specs:

• Runs various case sizes
• Automatically sizes independently to each case, eliminating the need for manual adjustments
• DEKKA High Performance stainless steel tape heads
• Modular design allows for a customized BEL system delivered to you at an off-the-shelf lead time and price

Options

• Adjustable box stand
• A-42 Rotary Accumulation Turntable
• Total Lock Caster Wheels with Extension Adjustment
• Roller Conveyor for Infeed & Outfeed
• Flexible Conveyor
• Spare Parts Kits for Machine Maintenance
• S-10 Packing Conveyor with Programmable Weigh Scale
• ErgoLevel Packing Height Adjustment Option

Components

• 1″ Heavy Duty Acme Screws
• Motor and Gear Reducer
• Dekka Tape Head
• Magnetic Motor Starter

BEL products are ideal for packaging lines that do not warrant full automation because of specific requirements like:

• Frequent case size changes
• Many different case sizes and pack configurations
• Limited floor space
• Manual inspection of the products
• Limited technical staff
• The high price of automated case packers and erectors
• Low volume

WEXXAR BEL 250

The BEL 250 is a fully automatic, pressure sensitive, uniform case taper. It’s innovative design emphasizes safety, simple operation and rugged construction all contained within the smallest footprint of any fully automatic case taper. The exclusive BEL Snap Folder folds top flaps closed automatically without using dangerous rear flap kicking arms.

The BEL 250 fully automatic, pressure sensitive, uniform case taper is equipped with stainless steel DEKKA High Performance tape heads to provide sealing speeds up to 25 cases per minute on a wide range of case sizes. The BEL 250 case taper is the premier model in the BEL line of case tapers and its sturdy corrosion resistant construction will provide years of dependable performance in high demand production environments.

BEL 250 Pressure Sensitive Case Taper Features & Specs:

• Speed: 25 cases per minute (CPM)
• Runs various case sizes
• The smallest footprint of any fully automatic case taper
• DEKKA High Performance stainless steel tape heads
• Modular design allows for a customized BEL system delivered to you at an off-the-shelf lead time and price

Options

• Adjustable box stand
• A-42 Rotary Accumulation Turntable
• Total Lock Caster Wheels with Extension Adjustment
• Roller Conveyor for Infeed & Outfeed
• Flexible Conveyor
• Spare Parts Kits for Machine Maintenance
• S-10 Packing Conveyor with Programmable Weigh Scale
• ErgoLevel Packing Height Adjustment Option

Components

• 1″ Heavy Duty Acme Screws
• Motor and Gear Reducer
• C Channel Aluminum Frame
• Dekka Tape Head
• Magnetic Motor Starter
• Snap Folder
• Uni-Drive

BEL products are ideal for packaging lines that do not warrant full automation because of specific requirements like:

• Frequent case size changes
• Many different case sizes and pack configurations
• Limited floor space
• Manual inspection of the products
• Limited technical staff
• The high price of automated case packers and erectors
• Low volume

WEXXAR BEL 252 CASE SEALER

The BEL 252 is a fully automatic, pressure sensitive uniform case taper. It is an affordable high quality fully automatic case taper that offers highly advanced production duty design. No other brand of automatic case taper compares with the BEL 252 for compactness, safety, quality of construction, operating performance and value.

The BEL 252 pressure sensitive case taper is equipped with DEKKA High Performance stainless steel tape heads and the exclusive BEL Snap Folder system providing sealing speeds up to 25 cases per minute. Quick three step size change with simple hand wheel and clamp adjustments enable the BEL 252 to seal a wide range of case sizes.

The BEL 252 fully automatic, uniform case taper is a perfect choice for the production packer looking to automate case sealing lines at a practical cost.

BEL 252 Pressure Sensitive Case Taper Features & Specs:

• Speed: 25 cases per minute
• Quick case size changes
• Runs various case sizes
• DEKKA High Performance stainless steel tape heads
• Modular design allows for a customized BEL system delivered to you at an off-the-shelf lead time and price

Options

• Adjustable box stand
• A-42 Rotary Accumulation Turntable
• Total Lock Caster Wheels with Extension Adjustment
• Roller Conveyor for Infeed & Outfeed
• Flexible Conveyor
• Spare Parts Kits for Machine Maintenance
• S-10 Packing Conveyor with Programmable Weigh Scale
• ErgoLevel Packing Height Adjustment Option

Components

• 1″ Heavy Duty Acme Screws
• Motor and Gear Reducer
• C Channel Aluminum Frame
• Dekka Tape Head
• Magnetic Motor Starter
• Snap Folder
• Uni-Drive

BEL products are ideal for packaging lines that do not warrant full automation because of specific requirements like:

• Frequent case size changes
• Many different case sizes and pack configurations
• Limited floor space
• Manual inspection of the products
• Limited technical staff
• The high price of automated case packers and erectors
• Low volume

WEXXAR BEL 150

WEXXAR BEL 290

The BEL 290 automatic case sealer is designed to meet the case sealing demands of heavy-duty applications and to minimize energy waste during slow or paused case production upstream. The case sealer is equipped with Power Save Mode as well as other popular Wexxar/BEL features, including easy touch-screen controls; a self-squaring side-belt drive system; fully-interlocking safety guarding; tool-less, color-coded case size changeover, and extruded aluminum frame construction. This automatic case sealer also features a very compact design that allows it to fit easily into existing packaging lines.

The BEL 290 compact case sealer precisely folds and seals the major and minor flaps for a wide range of case sizes and is available for top sealing or top and bottom sealing.

BEL 290 Automatic Case Sealer with Power Save Mode Features & Specs:

• Energy Management – built in Power Save Mode allows the BEL 290 to power down and hibernate when the system is not in use, or during paused case production upstream, and to restart again when case flow resumes
• Easy Set-up Guides – tool-less, color-coded case size changeover in under 5 minutes
• Operator Safety – advanced interlocked guarding aides in employee safety
  Touch-screen control to monitor all sealing related functions
• Easy to maintain, using the highest quality commercially available components
• Corrosion resistant finish throughout
• Compact footprint
• Equipped with Dekka stainless steel 2″ tape heads (optionally available with 3″ tape heads)

INTERTAPE RA 1000-SB

RA Series Case Sealers Are Operator Free Machines Engineered To Process Random Sized Cases. The RA Series Case Sealers Will Index The Flow Of Cases Into The Machine, Automatically Sense The Size Of The Case, Fold The Top Four Flaps And Seal The Case Both Top & Bottom. If Your Production Requirements Include Combining Multiple Production Lines And Processing Cases Of Varying Sizes

• Twin Side Belt Drive Systems Are Preferred For Void Fills, Overfills And Lightweight Cases
• Dual Station Upper Assembly Provides Faster Through Speeds
• Interlocking Safety Gates
• Standard Indexing Gate
• Top Belt Drive In Taping Section

INTERTAPE UA 262024-SB

IPG®’s UA Series Uniform Automatic case sealers are operator free machines that fold the top four flaps and process same sized RSC style cases. These machines are required when consistent production flow rates exceed manual processing ability or when automatic case packing is utilized. Interpack offers a UA Series automatic case packing machine for every application and budget. Interpack can customize to specific requirements such as line voltage, operation range or 4-flap pickup assemblies.

• Side Belt Drive Is Preferred For Void Fills, Overfills And Lightweight Cases
• Offset Tape Heads Will Process Cases As Low As 3 1/2″ Tall
• Compact 65″ Long Frame
• Standard Interlocking Safety Gates
• Selectable Floating Upper Head To Processes Mild Overfills
• Standard Indexing Gate
• Onboard PLC Eliminates Case Length Adjustment
• Self Tensioning / Self Tracking Belt Drive

INTERTAPE RSA 2024-TB

This premium drive style “captures” the case between four drive belts located above and below the case. This configuration provides maximum stability since it applies force to the strongest areas of the case which is in the direction of the fluting of the corrugated. Minimizing force is applied while the case is processing. This style processes the widest variety of case dimension but certain narrow width cases may be better suited on side belt drives.

• Top & Bottom Belt Is The Premium Drive Preferred For Most Applications
• Offset Tape Heads Will Process Cases As Low As 2″ Tall
• Horizontal Pneumatic Centering Side Guides With Roller To Reduce Operator Fatigue
• “Head Up” Switch To Raise And Secure The Upper Head Provides A Safe
• Condition To:
• Clear Jams
• Replace Lower Tape Roll
• Self Tensioning / Self Tracking Belt Drive

INTERTAPE RSA 3036-SB

Specifically designed to process a larger range of cases. This side belt drive random case sealer contains the same package of features and benefits as the standard sized RSA 2024-SB. Construction is reinforced to handle the larger, heavier cases. Standard 4″ tall drive bases provide twice the gripping power.

• Designed To Process Larger, Heavier Cases
• 4″ Tall Drive Bases Standard
• 2 Modes Of Operation
• Upper Head Retained Random Mode
• Bottom Only Seal Mode
• Pneumatic Infeed Gate Assures Proper Positioning Of The Case During Processing And Drastically Reduces Jams
• 1/3 HP High Torque Gearmotors Processes Heavier Cases
• Self Tensioning / Self Tracking Belt Drive

INTERTAPE RSA 2024-SB

IPG®’s RSA Series case sealers are operator fed machines that automatically adjust for each size case processed. When your production produces different sized cases to be processed through a single case sealer, an Interpack random case sealer is your answer. Choose from side belt drive or top & bottom belt drive.

Its side belts contact the case on the lower portion of each side of the case. It will “capture” the case between moving side belts as it propels it past upper and lower tape heads and as such, is ideal for pre-sealing the bottoms of empty cases prior to packing. Side Belt Drive is the preferred method of processing narrow width cases. This style will process a wide variety of case dimensions but certain extremely heavy or extremely unstable cases may be better processed on a top & bottom belt drive.

This side belt drive random case sealer processes a wide range of cases. Interpack’s digital pneumatic system retains the upper head after each case to improve throughput speed. A pneumatic infeed gate assure proper case position during processing and reduces jams.

• Side Belt Drive Is Preferred For Narrow Cases Or Where Random Top Squeezers Are Necessary To Compress The Top Major Flaps
• 2 Modes Of Operation
• Upper Head Retained Random Mode
• Bottom Only Seal Mode
• Pneumatic Infeed Gate To Position Case For Proper Processing
• Offset Tape Heads Will Process Cases As Low As 2″ Tall
• 1/3 HP Gearmotors Processes Heavier Cases
• Self Tensioning / Self Tracking Belt Drive

INTERTAPE USC-2020-TB

This “street fighter” is perfectly suited for battle in low to medium production volumes. Check the features, check the construction, then check the price. The decision will be easy.

• Ideal For Light To Medium Volume Production
• Hand Crank Upper Head Adjustment
• Self Centering Swivel Case Centering Rails
• Compact Footprint To Conserve Valuable Floor Space
• Twin 1/5th HP Gearmotors
• “V” Groove Belt Tracking
• Optional Swivel And Locking Casters
• Standard Top Squeezers

INTERTAPE USA 2324-TB

USA SERIES – Top & Bottom Belt Drive Models

This premium drive style “captures” the case between four drive belts located above and below the case. This configuration provides maximum stability since it applies force to the strongest areas of the case which is in the direction of the fluting of the corrugated. Minimizing force is applied while the case is processing. This style processes the widest variety of case dimension but certain narrow width cases may be better suited on side belt drives.

The industry standard for high end carton sealing. This machine has features unsurpassed among its competition. With the widest operating range and the most powerful belt drive, this machine is the choice for round the clock applications.

• Top & Bottom Belt Is The Premium Drive Most Preferred
• Offset Tape Heads Will Process Cases As Low As 2″ Tall
• Horizontal Self Centering Side Guides
• Slide & Lock Upper Head Provides Rapid Case Size Set Up
• 1/2 HP Gearmotor On Bottom Drive Processes Heavier Cases
• Standard 3 Wheel Top Squeezers
• Self Tensioning / Self Tracking Belt Drive

INTERTAPE USA 2324-BB

USA SERIES – Bottom Belt Drive Models

This common drive style provides the benefit of simplicity of design and is appropriate for many applications. The case is carried past the tape heads on the tops of twin bottom belts. This style requires some downward pressure form the upper head assembly to propel it past the tape heads. This requirement may make it unsuitable for lightweight, unstable, void filled or narrow case sizes.

• Offset Tape Heads Will Process Cases As Low As 2″ Tall
• Horizontal Self Centering Side Guides
• Slide & Lock Upper Head Provides Rapid Case Size Set Up
• “Floating” Upper Head Improves Tape Application And Wipe Down When Processing Compressible Overfills
• Standard 3 Wheel Top Squeezers
• 1/2 HP Gearmotor Processes Heavier Cases
• Self Tensioning / Self Tracking Belt Drive

INTERTAPE USA 3036-SB

IPG®’s USA Series case sealers are adjustable, operator fed machines that process same sized RSC style cases. IPG® offers a USA series machine for every application and every budget. From powder coated carbon steel to food grade stainless steel, IPG® machines are built to last. Choose from side belt drive, bottom belt drive, or top & bottom belt drive.

Running large size cases? The USA 3036-SB has the power and construction to handle large, heavy cases.

• 4″ Tall side belt drive bases process heavier cases
• 3″ wide tape heads standard
• Slide & Lock upper head provides rapid case size set up
• “Floating upper head compensates for compression overfills
• Twin 1/3rd HP gearmotors
• Self tensioning/self tracing belt drive
• Stainless steel infeed Guides

INTERTAPE USC 2020-SB

IPG®’s USA Series case sealers are adjustable, operator fed machines that process same sized RSC style cases. IPG® offers a USA series machine for every application and every budget. From powder coated carbon steel to food grade stainless steel, IPG® machines are built to last. Choose from side belt drive, bottom belt drive, or top & bottom belt drive.

Need to automate on a budget? This machine is ideal for low to medium production volume. This machine still has many of the features of our standard line

• Ideal For Light To Medium Volume Production
• Hand Crank Upper Head Adjustment
• Compact Footprint To Conserve Valuable Floor Space
• Twin 1/5th HP Gearmotors
• “V” Groove Belt Tracking
• Standard Swivel And Locking Casters
• Standard Top Squeezers

INTERTAPE USA 2024-SB SS

IPG®’s USA Series case sealers are adjustable, operator fed machines that process same sized RSC style cases. IPG® offers a USA series machine for every application and every budget. From powder coated carbon steel to food grade stainless steel, IPG® machines are built to last. Choose from side belt drive, bottom belt drive, or top & bottom belt drive.

Does your production environment require wash down with detergent? This food grade stainless steel, NEMA 4 rated machine is just the answer.

• Constructed From Food Grade 302 & 304 Stainless Steel
• HSD 2000-ET II SS Stainless Steel Tapes Heads Standard
• NEMA 4 Electrics
• Offset Tape Heads Will Process Cases As Low As 2″ Tall
• Slide & Lock Upper Head Provides Rapid Case Size Set Up
• “Floating” Upper Head Compensates For Compressible Overfills
• Twin 1/3rd HP Gearmotors
• Self Tensioning / Self Tracking Belt Drive

INTERTAPE USA 20-B

IPG®’s USA Series case sealers are adjustable, operator fed machines that process same sized RSC style cases. IPG® offers a USA series machine for every application and every budget. From powder coated carbon steel to food grade stainless steel, IPG® machines are built to last. Choose from side belt drive, bottom belt drive, or top & bottom belt drive.

The USA 20-B is used to primarily seal the bottoms of uniform cases in preparation for packing. Other uses include sealing full telescopic style cases.

• Will Pre-Seal The Bottom Center Seam Of RSC Style Cases For Delivery To Packing Stations
• Twin 1/3rd HP Gearmotors
• Self Tensioning / Self Tracking Belt Drive
• Stainless Steel Fixed Infeed Guides
• Available Spring Loaded Infeed Guides

INTERTAPE USA 2024 SB

IPG®’s USA Series case sealers are adjustable, operator fed machines that process same sized RSC style cases. IPG® offers a USA series machine for every application and every budget. From powder coated carbon steel to food grade stainless steel, IPG® machines are built to last. Choose from side belt drive, bottom belt drive, or top & bottom belt drive.

Our flagship case sealer, the USA 2024-SB is the state of the art in high quality case sealing machines

• Offset Tape Heads Will Process Cases As Low As 2″ Tall
• Slide & Lock Upper Head Provides Rapid Case Size Set Up
• “Floating” Upper Head Compensates For Compressible Overfills
• Twin 1/3rd HP Gearmotors
• Self Tensioning / Self Tracking Belt Drive
• Stainless Steel Infeed Guides

7000R

The 3M-Matic Random Case Sealer 7000r Pro/7000r3 Pro gives manufacturers and distributors from every industry the packaging flexibility and speed to stay one step ahead of the competition. This advanced technology case sealer is an ideal solution for top and bottom sealing of random-sized cases. Automatically adjusting to both case height and width, the 3M-Matic Random Case Sealer 7000r Pro/700r3 Pro can handle up to 24 different case sizes per minute.

INNOVATIVE FEATURES

• 3M Accuglide 3 Taping Heads ensure reliable application of tape without box damage
• Auxiliary offset taping head position provides more flexibility in sealing shorter boxes
• Interchangeable taping heads maximize production flexibility
• Rugged dual-extruded columns allow for smooth, incremental adjustments to case height
• Photo eye detection for box centering quickly responds to cartons of different widths
• Electro-mechanical height adjustment delivers precision performance and durability

3M MATIC 800 RKS CASE SEALER

3M-Matic™ Case Sealer 800rks is a random king size case sealer that automatically adjusts for case height and width and is capable of sealing up to 10 boxes per minute, using tape widths from 48mm to 72mm wide.

• Randomly adjusts to handle multiple box sizes.
• Top and bottom side-belt drive for positive box conveying.
• Rugged construction with 16-gauge welded steel frame and powder coat paint finish.
• General industrial and furniture.
• Random case sealing, box sealer, and taper
• Seals case lengths of 15 inches and up, widths of 8 inch – 30 inch, heights 12 inch – 50 inch.

Specifications

• Brand: 3M-Matic
• Color: Gray
• Drive System: Side Belt
• Frame Material: Epoxy Powder Coated Steel
• Industry – Use: Furniture, General Industrial
• Machine Type: Random Sized Boxes
• Maximum Box Height: 50 Inch
• Maximum Box Weight: 200 Pound
• Maximum Box Width: 30 Inch
• Maximum Cases per Minute: 10 Cases Per Minute
• Minimum Box Height: 12 Inch
• Minimum Box Length: 15 Inch
• Minimum Box Width: 8 Inch
• Operation: Operator folds flaps
• Product Form: Each
• Tape Width: 3 Inch (72 mm)

3N NATIC 800 AB3 BOTTOM SEAL CASE SEALER

3M-Matic™ Case Sealer 800ab3 with 3M™ AccuGlide™ 3 Taping Head is an adjustable side belt drive case sealer. Bottom seal only at rates up to 40 cases/minute, using tape widths from 48 mm to 72 mm wide.

• Twin gear drive motors for heavy-duty reliability.
• Spring-loaded side drives to center cases. Inclined rollers at in-feed help keep case down on conveyor bed.
• Rugged construction with 16-gauge welded steel frame and epoxy paint finish.
• Food and beverage, paper and print, distribution centers, pharmaceutical and general industrial.
• Semi-automatic bottom only case sealing.
• Seals case lengths of 6 inches and up; width 5.5 inch – 21.5 inch; height 4.75 inch and up.

Specifications

• Application: Packing Product in Batches
• Brand: 3M-Matic
• Color: Gray
• Drive System: Side Belt
• Frame Material: Epoxy Powder Coated Steel
• Industry – Use: Food and Beverage, General Industrial, Medical, MRO, Paper, Print
• Machine Type Uniform: Sized Boxes
• Maximum Box Weight: 85 Pound
• Maximum Box Width: 21-1/2 Inch
• Maximum Cases per Minute: 40 Cases Per Minute
• Minimum Box Height: 4-3/4 Inch
• Minimum Box Length: 6 Inch
• Minimum Box Width: 5-1/2 Inch
• Operation: Operator folds flaps
• Product Form: Each
• Tape Width: 3 Inch (72 mm)

3M MATIC 700A-S SEMI AUTO ADJUSTABLE CASE SEALER

3M-Matic Semi-Automatic Adjustable Case Sealer 700a-s is a manually adjustable stainless steel construction case sealer for corrosive environments.

• Consistent durable case taper that manually adjusts to handle multiple box sizes.
• Rugged construction with 16-gauge welded steel frame and powder coat paint finish.
• Top and bottom belt drive for positive box conveying.
• Food and beverage, pharmaceutical and clean room environments
• Case sealing, box sealer, taper, adjustable case sealer.
• Seals up to 30 cases/min. Includes 3M ™ AccuGlide ™ 2+ Stainless Steel Taping
• Heads for low-impact application of tape 36 mm to 48 mm wide.

Specifications

• Brand: 3M-Matic
• Color: Silver
• Drive System: Top and Bottom Belt
• Frame Material: Stainless Steel
• Industry – Use: Electronics, Food, and Beverage, Medical
• Machine Type: Uniform Sized Boxes
• Maximum Box Height: 24-1/2 Inch
• Maximum Box Weight: 85 Pound
• Maximum Box Width: 21-1/2 Inch
• Maximum Cases per Minute: 40 Cases Per Minute
• Minimum Box Height: 4-3/4 Inch
• Minimum Box Length: 6 Inch
• Minimum Box Width: 6 Inch
• Operation: Operator folds flaps
• Product Form: Each
• Tape Width: 2 Inch (48 mm)

3M MATIC S867 L CLIP APPLICATOR

3M-Matic™ L-Clip Applicator S867 applies 4.5-inch L-clips of Scotch® Filament or Reinforced Strapping Tape (RST) at up to 50 clips/min.

• Applies 4.5-inch L-Clips to seal non-RSC style boxes.
• No adjustment for box size required.
• Utilizes filament reinforced tape and transparent reinforced strapping tape (RST).
• Food and beverage, sporting goods and general industrial.
• Case sealing, box sealing
• Pneumatic operation. Supports 12 mm to 36 mm tape width capacities. Machine dimensions: 31 inches long x 11 inches wide x 29 inches high.

Specifications

• Brand: 3M-Matic
• Color: Gray
• Drive System: Other
• Frame Material: Stainless Steel
• Industry – Use: Consumer Goods, Food and Beverage, General Industrial
• Machine Type: Speciality
• Maximum Cases per Minute: 50 Clips Per Minute
• Operation: Operator folds flaps
• Product Form: Each
• Tape Width: 1-1/2 Inch (36 mm)

3M MATIC A80F ADJUSTABLE CASE SEALER

3M-Matic™ Adjustable Case Sealer a80f is an adjustable and fully automatic case sealer that seals the top and bottom of cases.

• Consistent durable case taper that manually adjusts to handle multiple box sizes and offers top flap folding.
• Rugged construction with a 16-gauge steel frame and powder coat paint finish.
• Side belt drive for positive box conveying.
• Food and beverage, general industrial, apparel, clothing, paper, print, personal care, and cosmetics.
• Case sealing, box sealing, automatic upper flap folding.
• Seals cases up to 30 cases per minute. Includes 3M™AccuGlide™ 2+ Taping
• Heads for low-impact application of tapes 36 mm to 48 mm wide.

Specifications

• Brand: 3M-Matic
• Color: Gray
• Drive System: Side Belt
• Frame Material: Epoxy Powder Coated Steel
• Industry – Use: Consumer Goods, Food, and Beverage, General Industrial, Paper, Print
• Machine Type: Uniform Sized Boxes
• Maximum Box Height: 21-1/2 Inch
• Maximum Cases per Minute: 30 Cases Per Minute
• Minimum Box Height: 4-3/4 Inch
• Minimum Box Length: 6 Inch
• Operation: Operator folds flaps
• Product Form: Each
• Tape Width: 2 Inch (48 mm)

3M MATIC A80 ADJUSTABLE CASE SEALER

3M-Matic™ Adjustable Case Sealer a80 is an adjustable side belt drive case sealer that dependably seals uniform size cases.

• Handles narrow width boxes.
• Consistent quality tape application up to 30 cases per minute.
• Economical
• Food and beverage, paper and print, distribution centers, pharmaceutical and general industrial.
• Case sealing, box sealer, taper, adjustable case sealer.
• Seals the top and bottom of uniform size cases with 36 to 48mm box sealing tape.

Specifications

• Brand: 3M-Matic
• Color: Gray
• Drive System: Side Belt
• Frame Material: Epoxy Powder Coated Steel
• Industry – Use: Food and Beverage, General Industrial, Medical, MRO, Paper, Print
• Machine Type: Uniform Sized Boxes
• Maximum Box Height: 21-1/2 Inch
• Maximum Box Weight: 65 Pound
• Maximum Box Width: 21-1/2 Inch
• Maximum Cases per Minute: 30 Cases Per Minute
• Minimum Box Height: 4-3/4 Inch
• Minimum Box Length: 6 Inch
• Minimum Box Width: 4-3/4 Inch
• Operation: Operator folds flaps
• Product Form: Each
• Tape Width: 2 Inch (48 mm)

3M MATIC A20 ADJUSTABLE CASE SEALER

3M-Matic™ Adjustable Case Sealer a20 is an adjustable bottom belt drive case sealer to dependably seal uniform cases. Includes 3M™ AccuGlide™ Taping Head 2+ for low impact application of tape 36mm to 48mm wide.

• Economically priced case sealer
• Easily adjustable to handle multiple box sizes.
• Bottom belt drive for positive box conveying.
• Food and beverage, paper and print, distribution centers, pharmaceutical and general industrial.
• Semi-automatic case sealing
• Seals broad range of carton sizes from 6″ width to 21.5″ width and 3.5″ high to 21.5″ high. Ideal for operations currently taping boxes by hand.

Specifications

• Brand: 3M-Matic
• Color: Gray
• Drive System: Bottom Belt
• Frame Material: Epoxy Powder Coated Steel
• Industry – Use: Food and Beverage, General Industrial, Medical, MRO, Paper, Print
• Machine Type: Uniform Sized Boxes
• Maximum Box Height: 21-1/2 Inch
• Maximum Box Weight: 65 Pound
• Maximum Box Width: 21-1/2 Inch
• Maximum Cases per Minute: 30 Cases Per Minute
• Minimum Box Height: 4-3/4 Inch
• Minimum Box Length: 6 Inch
• Minimum Box Width: 6 Inch
• Operation: Operator folds flaps
• Product Form: Each
• Tape Width: 2 Inch (48 mm)

3M-MATIC 800 RF FULLY AUTOMATIC CASE SEALER

3M-Matic Fully Automatic Case Sealer, Model 800Rf The 3M-Matic 800Rf Is A Fully Automatic Random Side Belt Drive Sealer That Automatically Adjusts To Tape Cartons From 10” To 24” Long, 8” To 19.5” Wide And 6” To 20” High At Speeds Of Up To 8 Cartons Per Minute.

3M-MATIC 800R SEMI-AUTOMATIC CASE SEALER

3M-Matic™ Case Sealer 800r3 with 3M™ AccuGlide™ 3 Taping Head is a random case sealer automatically adjusts for case size. Top and bottom seal at rates up to 15 cases/minute, using tape widths from 48 mm to 72 mm wide.

• Consistent durable case taper that randomly adjusts to handle multiple box sizes.
• Side belt drive for positive box conveying.
• Rugged construction with 16-gauge welded steel frame and epoxy paint finish.
• Food and beverage, paper and print, distribution centers, pharmaceutical and general industrial.
• Semi-automatic random case sealing
• Seals case lengths of 8 inches and up; widths of 5.25 inches – 19.5 inches and heights from 4.75 inches to 19.5 inches.

Specifications

• Brand: 3M-Matic
• Color: Gray
• Drive System: Side Belt
• Frame Material: Epoxy Powder Coated Steel
• Industry – Use: Food and Beverage, General Industrial, Medical, MRO, Paper, Print
• Machine Type: Random Sized Boxes
• Maximum Box Height: 19-1/2 Inch
• Maximum Box Weight: 85 Pound
• Maximum Box Width: 19-1/2 Inch
• Maximum Cases per Minute: 19 Cases Per Minute
• Minimum Box Height: 4-1/4 Inch
• Minimum Box Length: 8 Inch
• Minimum Box Width: 5-1/4 Inch
• Operation: Operator folds flaps
• Product Form: Each
• Tape Width: 3 Inch (72 mm)

3M-MATIC 800AF FULLY AUTOMATIC CASE SEALER

3M-Matic™ Case Sealer 800af is an adjustable fully automatic case sealer

• Consistent durable case taper that manually adjusts to handle multiple box sizes and offers top flap folding.
• Rugged construction with 16-gauge welded frame and powder coat paint finish.
• Side belt drive for positive box conveying.
• Food and beverage, paper and print, distribution centers, pharmaceutical and general industrial.
• Case sealing, box sealing, automatic upper flap folding.
• Automatically folds top minor and major flaps and securely seals carton with 48mm to 72mm tape at up to 35 cases per minute. AccuGlide ™ 3 Taping Heads Standard

Specifications

• Brand: 3M-Matic
• Color: Gray
• Drive System: Side Belt
• Frame Material: Epoxy Powder Coated Steel
• Industry – Use: Food and Beverage, General Industrial, Medical, MRO, Paper, Print
• Machine Type: Uniform Sized Boxes
• Maximum Box Weight: 85 Pound
• Maximum Cases per Minute: 28 Cases Per Minute
• Minimum Box Width: 4-3/4 Inch
• Operation Machine: folds flaps
• Product Form: Each
• Tape Width: 2 Inch (48 mm)

3M-MATIC 800A SEMI-AUTOMATIC CASE SEALER

3M-Matic™ Case Sealer 800a with 3M™ AccuGlide™ 3 Taping Head is an adjustable side belt drive case sealer. Seals up to 40 cases per minute, using tape widths from 36 mm to 48 mm.

• Consistent durable case taper that manually adjusts to handle multiple box sizes.
• Rugged construction with 16-gauge welded steel frame and powder coat paint finish.
• Side belt drive for narrow profile boxes.
• Food and beverage, paper and print, distribution centers, pharmaceutical and general industrial.
• Case sealing, box sealer, taper, adjustable case sealer.
• Seals case lengths of 6 inches and up; widths 4.5 inch to 21.5 inch; and heights 4.75 inch to 24.5 inch.

Specifications

• Brand: 3M-Matic
• Color: Gray
• Drive System: Side Belt
• Frame Material: Epoxy Powder Coated Steel
• Industry – Use: Food and Beverage, General Industrial, Medical, MRO, Paper, Print
• Machine Type: Uniform Sized Boxes
• Maximum Box Height: 24-1/2 Inch
• Maximum Box Weight: 85 Pound
• Maximum Box Width: 21-1/2 Inch
• Maximum Cases per Minute: 40 Cases Per Minute
• Minimum Box Height: 4-3/4 Inch
• Minimum Box Length: 6 Inch
• Minimum Box Width: 4-1/2 Inch
• Operation: Operator folds flaps
• Product Form: Each
• Tape Width: 2 Inch (48 mm)

3M-MATIC 700RKS SEMI-AUTOMATIC CASE SEALER

3M-Matic™ Case Sealer 700rks is a random king size case sealer that automatically adjusts for case height and width and is capable of sealing 19 boxes per minute, using tape widths from 48mm to 72mm wide.

• Randomly adjusts to handle multiple box sizes.
• Top and bottom belt drive for positive box conveying.
• Rugged construction with 16-gauge welded steel frame and epoxy paint finish.
• Food and beverage, paper and print, distribution centers, pharmaceutical and general industrial.
• Random case sealing, box sealer, and taper.
• Seals case lengths of 6 inches and up, widths of 7 inch – 25.5 inch, heights 4.75 inch – 36 inch.

Specifications

• Brand: 3M-Matic
• Color: Gray
• Drive System: Top and Bottom Belt
• Frame Material: Epoxy Powder Coated Steel
• Industry – Use: Food and Beverage, General Industrial, Medical, MRO, Paper, Print
• Machine Type: Random Sized Boxes
• Maximum Box Height: 25-1/2 Inch
• Maximum Box Weight: 85 Pound
• Maximum Box Width: 20-1/2 Inch
• Maximum Cases per Minute: 19 Cases Per Minute
• Minimum Box Height: 4-3/4 Inch
• Minimum Box Length: 6 Inch
• Minimum Box Width: 7 Inch
• Operation: Operator folds flaps
• Product Form: Each
• Tape Width: 3 Inch (72 mm)

3M-MATIC 700 AKS SEMI-AUTOMATIC CASE SEALER

3M-Matic™ Case Sealer 700aks With 3M ™ AccuGlide™ 3 Taping Head is an adjustable king-size top and bottom belt drive to dependably seal uniform cases up to 25.5 inch wide by 36 inch high at up to 40 cases per minute.

• Consistent durable case taper that manually adjusts to handle multiple box sizes.
• Top and bottom belt drive for positive box conveying
• Larger box size capacity.
• Food and beverage, paper and print, distribution centers, pharmaceutical and general industrial.
• Case sealing, box sealer, taper, adjustable case sealer.
• Seals case length of 6 inches and up; width of 7 inch to 25.5 inch; height of 4.75 inch to 25.5 inch.

Specifications

• Brand: 3M-Matic
• Color: Gray
• Drive System: Top and Bottom Belt
• Frame Material: Epoxy Powder Coated Steel
• Industry – Use :Food and Beverage, General Industrial, Medical, MRO, Paper, Print
• Machine Type: Uniform Sized Boxes
• Maximum Box Height: 24-1/2 Inch
• Maximum Box Weight: 85 Pound
• Maximum Box Width: 20-1/2 Inch
• Maximum Cases per Minute: 40 Cases Per Minute
• Minimum Box Height: 4-3/4 Inch
• Minimum Box Length: 6 Inch
• Minimum Box Width: 7 Inch
• Operation: Operator folds flaps
• Product Form: Each
• Tape Width: 3 Inch (72 mm)

3M-MATIC 700A SEMI-AUTOMATIC CASE SEALER

3M-Matic™ Case Sealer 700a With 3M™ AccuGlide™ 3 Taping Head is an adjustable top and bottom belt drive to dependably seal uniform cases at up to 40 per minute.

• Consistent durable case taper that manually adjusts to handle multiple box sizes.
• Rugged construction with 16-gauge welded steel frame and powder coat paint finish.
• Top and bottom belt drive for positive box conveying.
• Food and beverage, paper and print, distribution centers, pharmaceutical and general industrial.Case sealing, box sealer, taper, adjustable case sealer.
• Seals case length of 6 inches and up; width of 6 inch to 21.5 inch; height of 4.75 inch to 24.5 inch.

Specifications

• Brand: 3M-Matic
• Color: Gray
• Drive System: Top and Bottom Belt
• Frame Material: Epoxy Powder Coated Steel
• Industry – Use: Food and Beverage, General Industrial, Medical, MRO, Paper, Print
• Machine Type: Uniform Sized Boxes
• Maximum Box Height: 24-1/2 Inch
• Maximum Box Weight: 85 Pound
• Maximum Box Width: 21-1/2 Inch
• Maximum Cases per Minute: 40 Cases Per Minute
• Minimum Box Height: 4-3/4 Inch
• Minimum Box Length: 6 Inch
• Minimum Box Width: 6 Inch
• Operation: Operator folds flaps
• Product Form: Each
• Tape Width: 2 Inch (48 mm)

3M-MATIC SEMI-AUTOMATIC CASE SEALER, MODEL 200A

3M-Matic™ Case Sealer 200a With 3M™ AccuGlide™ 3 Taping Head is an adjustable bottom belt drive case sealer to dependably seal uniform size cases.

• Rugged construction with 16-gauge welded steel frame and epoxy paint finish.
• Consistent quality tape application up to 40 cases per minute.
• Easily adjustable to handle uniform box sizes.
• Food and beverage, paper and print, distribution centers, pharmaceutical and general industrial.
• Case sealing, box sealer, taper, adjustable case sealer
• Seals top and bottom of box in a broad range of carton sizes from 6″ width to 21.5″ width and 4.75″ high to 24.5″ high.

Specifications

• Brand: 3M-Matic
• Color: Gray
• Drive System: Bottom Belt
• Frame Material: Epoxy Powder Coated Steel
• Industry – Use: Food and Beverage, General Industrial, Medical, MRO, Paper, Print
• Machine Type: Uniform Sized Boxes
• Maximum Box Height: 24-1/2 Inch
• Maximum Box Weight: 85 Pound
• Maximum Box Width: 21-1/2 Inch
• Maximum Cases per Minute: 40 Cases Per Minute
• Minimum Box Height: 4-3/4 Inch
• Minimum Box Length: 6 Inch
• Minimum Box Width: 6 Inch
• Operation: Operator folds flaps
• Product Form: Each
• Tape Width: 2 Inch (48 mm)

3M-MATIC 700R3 CASE SEALER

3M-Matic™ Case Sealer 700r3 is a random size case sealer that automatically adjusts for case height and width and is capable of sealing 19 boxes per minute, using tape widths from 48mm to 72mm wide.

• Randomly adjusts to handle multiple box sizes.
• Top and bottom belt drive for positive box conveying.
• Rugged construction with 16-gauge welded steel frame and epoxy paint finish.
• Food and beverage, paper and print, distribution centers, pharmaceutical and general industrial.
• Random case sealing, box sealer, and taper
• Seals case lengths of 6 inches and up, widths of 7 inch – 21.5 inch, heights 4.75 inch – 24.5 inch.

SPECIFICATIONS

• Brand: 3M-Matic
• Color: Gray
• Drive System: Top and Bottom Belt
• Frame Material: Epoxy Powder Coated Steel
• Industry – Use: Food and Beverage, General Industrial, Medical, MRO, Paper, Print
• Machine Type: Random Sized Boxes
• Maximum Box Height: 24-1/2 Inch
• Maximum Box Weight: 85 Pound
• Maximum Box Width: 21-1/2 Inch
• Maximum Cases per Minute: 19 Cases Per Minute
• Minimum Box Height: 4-3/4 Inch
• Minimum Box Length: 6 Inch
• Minimum Box Width: 7 Inch
• Operation: Operator folds flaps
• Product Form: Each
• Tape Width: 3 Inch (72 mm)

LOVESHAW LDX-RTB

Case Sealing for the Real World

Loveshaw’s Little David Products Division is pleased to announce the release of the LDX-RTB – an innovative random semi-automatic case sealer designed to process both void-filled and over-stuffed cases at speeds exceeding 40% faster than the competition. In keeping with the tradition of customer-orientated product development, the LDX-RTB was designed using end-user feedback to provide solutions to the most common case sealing obstacles.

Patent-pending technology allows the LDX-RTB to process both void-filled and over-stuffed cases with zero adjustments, and reliability unseen in the random case sealing market. Utilizing CaseLockerTM 60 tape cartridges, allows the case sealer to process cases at significantly higher speeds then competitive case sealers.

• High Performance- Case Sealer processes cases between 40%-80% faster than the nearest competition-providing the efficiency you require.
• Industrial Design- Case hardened steel “v” rollers and non-mechanical side rail actuation ensure long-term performance and durability.
• Versatile- Capable of processing void-filled and overstuffed cases at high speeds.
• Same machine runs 2” and 3” tape plus mirror image setup.
• Quick/Easy Maintenance- Easy access motors, electrics, and belts facilitate quick and easy maintenance and repair.

LOVESHAW LD-24

Case Sealing for the Real World

The Little David LD-24 is the latest in a series of industrial grade high performance case sealers. Designed to meet the case sealing demands of customers with high volume runs of the same box size. It’s compact design is perfect for customers looking to take up less real estate between conveyors.

• Pneumatic case folding: dual side rear flap tuckers and positive folding of major flaps
• Removable crank handles and graduated adjustments that are scaled for fast and precise changeover
• Operator stations on both sides making it mirror image in the field
• Production speed of 100 ft. per minute and fully welded frame
• Adjustment free pneumatically tensioned quick change belts
• Adjustable height and PLC controls can be integrated into the customer’s conveyor system for start and stop control
• Energy saving mode, safety panel in folding area, indexing gate and box jam indicator
• Optional stainless steel main frame, threaded rods, casters or leveling pads

LOVESHAW SP-304

Case Sealing for the Real World

This extended side belt driven tape sealer propels cartons through a folding section, then folds all major flaps and one upper flap. Repetitive motion is reduced and productivity is increased with this innovative design.

• 2 Year Gear Motors
• 2 Years Gear Reducer
• 3 Years Cartridge
• Tapes boxes from 4-1/2″ (114mm) to 24″ (610mm) in height
• Plug in operation
• Minimal operator training required
• Sealed drive system
• CaseLocker ST™ tape cartridge requires no lubrication n Alleviates twisting motion known to cause carpal tunnel syndrome
• Self-centering belts
• Patented single mast design allows clear access
• Knife guard system of the CaseLocker ST® tape cartridge only allows the blade to be exposed only when the rollers have been depressed

LOVESHAW “LITTLE DAVID” LD-16A FULLY AUTOMATIC UNIFORM CASE SEALER

Loveshaw “Little David” Ld-16A Fully Automatic Uniform Case Sealer The Little David Ld-16A Provides Fully Automatic Top And Bottom Case Sealing For Applications Involving Runs Of Boxes Of The Same Size Without Operator Assistance. The Ld-16A Requires Little Maintenance And Easily Adjusts To Run Boxes Of Another Size.

Case Sealing for the Real World

24 hours/365 days per year reliability are what you can expect from this Heavy Duty fully automatic top and bottom case sealer for applications involving large runs of boxes. Box adjustments can be made in less than one minute. Plug -in operation, minimal operator training make this compact, 77″ length sealer, an assembly line workhorse. Also available in Bottom belt and Side belt.

• Year Motor
• 2 Years Gear Reducer
• 3 Years Cartridge
• Tapes boxes in a variety of sizes
• Can be ordered for 2″ or 3″ wide tape
• Minimal operator training required
• Sealed drive system
• CaseLocker ST® tape cartridge requires no lubrication

LOVESHAW “LITTLE DAVID” LD-3SB UNIFORM SIDE BELT CASE SEALER

Loveshaw “Little David” Ld-3Sb Uniform Side Belt Case Sealer The Little David Ld-3Sb Uniform Side Belt Case Sealer Is Perfect For High Profile, Light Weight, Unstable, Narrow Boxes Or Bottoms Only Of Open Cases In Off-Line Operations. The Ld-3Sb Uses Pressure Sensitive Tape And Incorporates Drive Belts On Both Sides The Box. The Ld-3Sb Tapes Boxes From 3” To Inf. Long, 4” To 20” Wide And 4-1/2” To 24” High.

This side belt driven tape sealer is recommended for dimensionally unstable boxes, lightweight boxes and boxes as narrow as 3-1/4″. Can be used for setting up empty boxes with bottom tape only.

• 2 Years Gear Reducer and motor
• 3 Years Cartridge
• Tapes boxes from 4-1/2″ (114mm) to 24″ (610mm) in height
• Uses pressure sensitive tape
• Plug in operation
• Minimal operator training required
• Sealed drive system
• CaseLocker ST® tape cartridge requires no lubrication
• Self-centering belts
• Single mast design allows clear access
• Knife guard system of the CaseLocker ST® tape cartridge only allows the blade to be exposed only when the rollers have been depressed

LOVESHAW LD-XSS

This revolutionary case sealer was designed to excel in the most sanitary sensitive industrial environments. The LD-Xss was created to meet an increasing demand for a case sealer that could remain in line while plants were being washed down. Heavy duty stainless steel design, fast/easy maintenance, easy clean design, and versatility make the LD-Xss a great value for any packaging line.

• Heavy duty stainless steel design
• Continuous TIG welding
• Patent pending quick release drive belts
• Easy access motor mounts for fast changeover
• Maximized water shedding to prevent bacterial growth
• Minimal overlapping joints to meet AMI standards for wash down environments
• Sealed tubular construction promotes easy cleaning
• 2” to 3” changeover in field
• Mirror image changeover in field
• 1 Year all components
• 2 Years Gear Reducer
• 3 Years Cartridge

LOVESHAW LD 7

Case Sealing for the Real World

An economical top and bottom case taper with a small footprint for sealing large runs of uniform cases, or for those applications that require infrequent case size changes.

• 1 Year all components
• 2 Years Gear Reducer
• 3 Years Cartridge
• Tapes boxes from 4-1/2″ (114mm) to 24″ (610mm)
• Compact design allows for portability
• Plug in operation
• Minimal operator training required
• Sealed drive system
• CaseLocker ST® tape cartridge requires no lubrication
• Single mast design allows clear access
• Knife guard system of the CaseLocker ST® tape cartridge allows the blade to be exposed only when the rollers are depressed
• 3 Years Cartridge