CARTON, CASE, AND TRAY ERECTING EQUIPMENT

WEXXAR WF30 AUTO-ADJUST CASE FORMER

The WF30 case former with the new Auto Adjust option automates some of the major size adjustments required on case forming machines during case size changes. The Auto Adjust greatly improves operation efficiency and reduces changeover times and other human factors during set-up.

Key Performance Benefits:

• Operation efficiency. Precise, tools free changeover, automating major changeover points when a specific case is selected. Frees the operator to monitor other packaging functions.
• Increased productivity. Ensures greater precision in case size adjustments, meaning less time spent running test cases and less waste. Box 1 is Ready to Run.
• Enhanced operating experience. Auto Adjust stores the length, width and height of up to 30 cases in the machine’s touch screen control panel, which can be retrieved easily for future case runs. The running speed can be assigned and saved for each case.
• Ease of changeover. Reliable, repeatable case size changes; reducing changeover times and other human factors where frequent case size changes take place.

WEXXAR WF30H AUTO HOT GLUE CASE FORMER

The WF30H fully automatic case former introduces a new level of refinement and performance and raises the standards for ease of use, case forming quality and customer value. The WF30H features a case squaring system and an enhanced Pin & Dome system that together ensure accurate forming throughout the process and easy handling of common imperfections found in corrugated boxes that can impact efficiency and quality. Built for sustained, high-speed glue applications, this operator-friendly machine will handle your most demanding packaging needs.

• Fully automatic case former with hot glue sealing Integrated safety guarding with keyed interlock switches.
• Compact, in-line design; highest quality, widely available hardware Unmanned operation – remote demand control
• Case opening without vacuum; WEXXAR patented technology High capacity case feed magazine
• All case feeding and forming functions independently air operated Positive case squaring and flap alignment
• Cases formed and delivered upright
• Broad case size range, easy set-up guides, easy operation and care Machine
• Tune-Assist feature for easy maintenance and monitoring Compression case bottom sealing for fast and reliable glue adhesion
• Aluminum, stainless steel and plated steel; entirely corrosion resistant
• Discharge at absolute minimum 21 in. (533 mm). With leveling pads, the range is 22 in. (559 mm) to 27 in. (686 mm)
• Case magazine at 31 in. (787 mm) at minimum discharge – comfortable loading height
• NEMA 12 UL/CSA listed standard electrical control
• Meets N.F.P.A.-79 standard
• 24 volt DC power supply built in for safe, low voltage operating controls PLC operated sequence and timing control
• Touch Screen (8” color) HMI for machine control and monitoring
• 240VAC, 3 Phase, 60Hz (other voltages available) 21 A 480VAC, 3 Phase, 60Hz (other voltages available) 16 A
• 32 SCFM; 1.05 cu. ft. per cycle at 90 p.s.i. (6 bar)
• Up to 30 c.p.m. depending on case size and case quality
• Nordson Problue 7
• R.S.C., H.S.C. or C.S.S.C.
• Approximately 10 minutes using tool-less, color-coded size changeover
• Lock-out tabs on electrical and air main shut-offs
• Many optional features for the widest range of applications

WEXXAR WF20H AUTO HOT GLUE CASE FORMER

The WF20H fully automatic case former introduces a new level of refinement and performance and raises the standards for ease of use, case forming quality and customer value. The WF20H features a case squaring system and an enhanced Pin & Dome system that together ensure accurate forming throughout imperfections found in corrugated boxes that can be impact efficiency and quality. The WF20H is equipped with a user-friendly touch screen HMI that can be configured for ethernet communication. It is built for sustained, high-speed glue applications, and will handle your most demanding packaging needs.

• Fully automatic case former with hot glue sealing Integrated safety guarding with keyed interlock switches.
• Compact, in-line design; highest quality, widely available hardware Unmanned operation – remote demand control
• Case opening without vacuum; WEXXAR patented technology High capacity case feed magazine
• All case feeding and forming functions independently air operated Positive case squaring and flap alignment
• Cases formed and delivered upright
• Broad case size range, easy set-up guides, easy operation and care Machine
• Tune-Assist feature for easy maintenance and monitoring Compression case bottom sealing for fast and reliable glue adhesion
• Aluminum, stainless steel and plated steel; entirely corrosion resistant
• Discharge at absolute minimum 21 in. (533 mm). With leveling pads, the range is 22 in. (559 mm) to 27 in. (686 mm)
• Case magazine at 31 in. (787 mm) at minimum discharge – comfortable loading height
• NEMA 12 UL/CSA listed standard electrical control
• Meets N.F.P.A.-79 standard
• 24 volt DC power supply built in for safe, low voltage operating controls PLC operated sequence and timing control
• Touch Screen (8” color) HMI for machine control and monitoring
• 240VAC, 1 Phase, 60Hz (other voltages available) 17.4 A 480VAC, 1 Phase, 60Hz (other voltages available) 8.7 A
• 28 SCFM; 1.40 cu. ft. per cycle at 90 p.s.i. (6 bar)
• Up to 20 c.p.m. depending on case size and case quality
• Nordson Problue 7
• R.S.C., H.S.C. or C.S.S.C. For other styles consult your WEXXAR representative
• Approximately 10 minutes using tool-less, color-coded size changeover
• Lock-out tabs on electrical and air main shut-offs
• Many optional features for the widest range of applications

WEXXAR WF2T AUTO CASE FORMER

Wexxar’s Model WF2T case formers are versatile and industry-proven machines with unique mechanical case forming and bottom flap folding technology. Offering maximum flexibility and performance within a broad range of styles and sizes, these are machines available with a choice of options to meet your own specific requirements. Wexxar WF2T features include: Dekka high performance tape head, Pin & Dome system, large case feed magazine, corrosion-resistant construction, U.L. listed electrical panel, simple 10-minute size change-over, interlocked safety guarding.

• Automatic case former with tape sealing
• Integrated safety guarding with keyed interlock switches.
• Compact, in-line design; highest quality, widely available hardware Unmanned operation – remote demand control
• Case opening without vacuum; WEXXAR patented technology High capacity case feed magazine
• All case feeding and forming functions independently air operated Positive case squaring and flap alignment
• Cases formed and delivered upright
• Broad case size range, easy set-up, operation and care
• Aluminum, stainless steel and plated steel; entirely corrosion resistant
• Discharge at absolute minimum 23 in. (584 mm). With leveling pads, the range is 24 in. (610 mm) to 28.5 in. (724 mm)
• Case magazine at 29 in. (736 mm) at minimum discharge – comfortable loading height
• NEMA 12 UL/CSA listed standard electrical control
• Meets N.F.P.A.-79 standard
• 24 volt DC power supply built in for safe, low voltage operating controls PLC operated sequence and timing control
• 230VAC, 3 Phase, 60Hz (other voltages available) 0.7 kVA, 10 AMP minimum service
• 0.2 cu. ft. (5.6 L) per cycle at 90 p.s.i.(6 bar)
• Up to 25 c.p.m. depending on case size and case quality Available “high speed mode” to 30 c.p.m
• DEKKA Model WEX-22 tape applicator head Other makes optional
• R.S.C., H.S.C. or C.S.S.C. For other styles consult your WEXXAR representative
• Approximately 10 – 15 minutes

WEXXAR WF2H AUTO HOT GLUE CASE FORMER

Wexxar’s WF2H automatic case former with hot glue closure provides positive case opening using the renowned “Pin and Dome” technology, mechanically capturing and positively squaring the case regardless of corrugate quality. Sealing a variety of case sizes and styles including RSC, HSC, and CSSC, cases are delivered upright, ready for packing. Simple size changeover in approximately 10 minutes.

• Compact, in-line design; highest quality, widely available hardware Unmanned operation – remote demand control
• Case opening without vacuum; WEXXAR patented technology High capacity case feed magazine
• All case feeding and forming functions independently air operated Positive case squaring and flap alignment
• Cases formed and delivered upright
• Broad case size range, easy set-up guides, easy operation and care Machine
• Tune-Assist feature for easy maintenance and monitoring Compression case bottom sealing for fast and reliable glue adhesion
• Aluminum, stainless steel and plated steel; entirely corrosion resistant
• Discharge at absolute minimum 21 in. (533 mm). With leveling pads, the range is 22 in. (559 mm) to 26.5 in. (673 mm)
• Case magazine at 29 in. (736 mm) at minimum discharge – comfortable loading height
• NEMA 12 UL/CSA listed standard electrical control
• Meets N.F.P.A.-79 standard
• 24 volt DC power supply built in for safe, low voltage operating controls PLC operated sequence and timing control
• Touch Screen (8” color) HMI for machine control and monitoring
• 230VAC, 1 Phase, 60Hz (other voltages available) 3 kVA
• Up to 20 c.p.m. depending on case size and case quality
• Nordson Problue 7
• R.S.C., H.S.C. or C.S.S.C.
• For other styles consult your WEXXAR representative
• Approximately 10 minutes using tool-less, color-coded size changeover

WEXXAR WF 10 AUTO CASE FORMER

The WF10 Fully Automatic Case Former / Case Erector showcases a revolutionary omni-handed feature which allows case packers to form right-handed and left-handed cases on the same machine without the need for specifically handed equipment. The fully automatic WF10 omni-handed case former is ideal for customers with multiple product sizes, allowing them to pack products in batches of left-oriented or right-oriented cases with a quick changeover in between. The WF10 case erector’s positive case squaring, delivers square cases in a fully upright position, ready for packing.

With speed and precision, the WF10 erects cases with a maximum speed of 10 cases per minute. Ensuring that your cases are ready for products in crucial. Get the Wexxar WF10 and experience increased time efficiencies and decreased labor costs.

With Wexxar machinery, your products remain safe and secure for shipping and distribution. This fully automatic case former and case erector works to keep your product lines running smoothly and effectively. With a small footprint, compact operations allow Wexxar’s machine to fit into virtually any application and production line. Other features on the WF10 include non-contacting sensors, a compliant driver belt, dynamic flap folding, and much more. Get the fully automatic case former and case erector from Wexxar and secure your products.

WF10 Automatic Case Former / Case Erector Features & Specs:

• Speed: Maximum 10 cases per minute (CPM)
• Size maximum: L: 20 x W: 15 x D: 15 Maximum
• Size minimum (Smaller/Custom sizes available by request): L: 9 x W: 7 x D: 5 Minimum
• Positive Case Squaring System: Lines up and squares the case during sealing, creating visually appealing case output.
• Toolless Size Changes: Not only a truly tool free operation, but we have cut the time for a full size change to under 5 minutes.

Standard Features on All Wexxar Machines:

• Pin & Dome: As flat case blank is injected into the two facing plates, the pins goes into the flutes and the dome pinches the corrugated tightly. The two plates then open to 90 degrees to perfectly square the case. Since no compressed air is used in this process, it greatly decreases contamination and is more durable than vacuum cups which can clog and wear.
• Safety & Ergonomic Features: Floor level tending reduces strain; every machine Wexxar builds is fully guarded from in-feed to out-feed, interlocked safety guarding throughout the machine; easily accessed control and assemblies; palm e-switches located on both sides.
• Dynamic Flap Folding: Wexxar case formers have a dynamic flap folding system. As long plow rails aren’t used, the overall length of the machine is significantly more compact.
• Compliant Drive Belt: Each of the two facing unidrive drive belts is mounted on a spring mechanism. This allows a constant pressure to be exerted on the case, despite normal variations in case width. Even heavy cases are handled carefully and with great control.
• Non-Contacting Sensors: Proximity sensors are able to have a much greater operating lifetime and don’t cause jams than contacting sensors.
• In-Line Operation: By keeping the intake and outflow of the machine in line with the rest of the line, aisles are kept free, safety is improved and space is saved.
• Simplicity of Construction: By planning through each step in the construction of the machine and its materials, Wexxar is able to greatly reduce potential problems.
• Small Footprint: Compact operations allows Wexxar’s machine to fit into virtually any application and production line.
• Integrated Controls: Connecting each machine in the full production line through common equipment and protocols reduces complexity and problems while increasing overall control.
• Tagout/Lockout: When a machine is locked out, it cannot be operated until all the safety features are in place.
• Paint-Free Construction: No paint: no contaminating flakes, no extra maintenance required.
• UL-Listed Electrical Panels: Wexxar meets or exceeds all standards, requirements and specifications
• NEMA Electrical Specifications: Wexxar meets or exceeds all standards, requirements and specifications
• Regional Service Available: Through Wexxar’s operating partnership with 10 other Pro Mach companies, there are factory trained service specialists available across North America.

WEXXAR WF20 FULLY AUTOMATIC CASE FORMER

The WF20 is a fully automatic case former / case erector with tape head and toolless changeover. Wexxar’s Pin & Dome machines have, for the last 25 years, become the standard for major customers who demand the highest quality output and maximum uptime.

From this experience, the Pin & Dome technology for case forming equipment has now evolved to be available to the mid-speed, mid-priced market. Box one is ready to run without the use of tools or guide-books. A color-coded, tactile guide offers a more efficient, friendly set-up for operators. The Tilt-out Tape Head (for the tape version), and the easy kip handle adjustments are all extra details that allow for a completely toolless, convenient changeover, in less than 5 minutes.

WF20 Automatic Case Former / Case Erector Features & Specs:

• Speed: Maximum 20 cases per minute (CPM)
• Size maximum: L: 24 x W: 17 x D: 16.5 Maximum E = 25
• Size minimum (Smaller/Custom sizes available by request): L: 6 x W: 5 x D: 3.5 Minimum E = 6
• Positive Case Squaring System: Lines up and squares the case during sealing, creating visually appealing case output.
• Single Push Transport System: Combines linear bearing guides with a mechanically adjustable case pusher for case squaring.
• Tool-less Size Changes: Not only a truly tool free operation, but we have cut the time for a full size change to under 5 minutes!
• Tilt Out Tape Head: Tape head tilts out over outfeed conveyor, for easy rethreading or tape head replacement.

Standard Features on All Wexxar Machines:

• Pin & Dome: As flat case blank is injected into the two facing plates, the pins goes into the flutes and the dome pinches the corrugated tightly. The two plates then open to 90 degrees to perfectly square the case. Since no compressed air is used in this process, it greatly decreases contamination and is more durable than vacuum cups which can clog and wear.
• Safety & Ergonomic Features: Floor level tending reduces strain; every machine Wexxar builds is fully guarded from in-feed to out-feed, interlocked safety guarding throughout the machine; easily accessed control and assemblies; palm e-switches located on both sides.
• Dynamic Flap Folding: Wexxar case formers have a dynamic flap folding system. As long plow rails aren’t used, the overall length of the machine is significantly more compact.
• Compliant Drive Belt: Each of the two facing unidrive drive belts is mounted on a spring mechanism. This allows a constant pressure to be exerted on the case, despite normal variations in case width. Even heavy cases are handled carefully and with great control.
• Non-Contacting Sensors: Proximity sensors are able to have a much greater operating lifetime and don’t cause jams than contacting sensors.
• In-Line Operation: By keeping the intake and outflow of the machine in line with the rest of the line, aisles are kept free, safety is improved and space is saved.
• Simplicity of Construction: By planning through each step in the construction of the machine and its materials, Wexxar is able to greatly reduce potential problems.
  Small Footprint: Compact operations allows Wexxar’s machine to fit into virtually any application and production line.
• Integrated Controls: Connecting each machine in the full production line through common equipment and protocols reduces complexity and problems while increasing overall control.
• Tagout/Lockout: When a machine is locked out, it cannot be operated until all the safety features are in place.
• Paint-Free Construction: No paint: no contaminating flakes, no extra maintenance required.
• UL-Listed Electrical Panels: Wexxar meets or exceeds all standards, requirements and specifications
• NEMA Electrical Specifications: Wexxar meets or exceeds all standards, requirements and specifications
• Regional Service Available: Through Wexxar’s operating partnership with 10 other Pro Mach companies, there are factory trained service specialists available across North America.

WEXXAR BEL 507 SEMI AUTO CASE FORMER

The BEL 507XL is an oversized semi-automatic tilting case former / case erector and pack station. It is designed to provide an ergonomically effective solution to the problem of erecting and packing large dimension, difficult to handle, corrugated RSC cases. Automating manual case packing lines with the BEL 507XL semi automatic case former creates further cost savings benefits by eliminating labor intensive manual preassembly of shipping cases prior to packing.

Tilting the case erecting machine towards the operator also enables tall cases to be handled more easily, while products that are unstable and subject to tipping become easier to load. The BEL 507XL semi-automatic tilting case former is simple to operate and adjust. Complete case size changes are made without tools by the operator in less than one minute with easy to use hand wheel settings.

BEL 507XL Semi-Automatic Case Former / Case Erector Features & Specs:

• Tilts the case towards the operator for better ergonomics when case packing
• Runs large dimension RSC corrugated cases
• Case size changes are made without tools in less than one minute
• Connects to any BEL case sealer, enabling one person to form, pack and seal corrugated cases in a single operation
• Improves safety by eliminating costly repetitive strain injury problems
• Modular design allows for a customized BEL system delivered to you at an off-the-shelf lead time and price

Options:
Adjustable box stand
A-42 Rotary Accumulation Turntable
Total Lock Caster Wheels with Extension Adjustment
Roller Conveyor for Infeed & Outfeed
Flexible Conveyor
Spare Parts Kits for Machine Maintenance
S-10 Packing Conveyor with Programmable Weigh Scale
ErgoLevel Packing Height Adjustment Option

Components:

• 1″ Heavy Duty Acme Screws
• C Channel Aluminum Frame

BEL Advantages
BEL products are ideal for packaging lines that do not warrant full automation because of specific requirements like:

• Frequent case size changes
• Many different case sizes and pack configurations
• Limited floor space
• Manual inspection of the products
• Limited technical staff
• The high price of automated case packers and erectors
• Low volume

WEXXAR BEL 505G3

Semi-Automatic Case Former

The BEL 505G3 is a multi-station, semi-automatic case former / case erector and pack station. The new generation BEL 505G3 case erecting machine embodies all the well-known ergonomic innovations of its predecessor, the BEL 505 Semi-Automatic Case Former, but is now a case forming pack station with multiple packing positions. The BEL 505G3 multi-station case erector further enables the operator to stay on top of packing by providing flexibility to pack from the rear end of the case as well as both sides.

The BEL 505G3 box erector also has an expanded standard case width range and is easier and quicker to adjust. Inserting a case blank into a BEL 505 case former results in automatic folding of all four bottom flaps and the case held ready for packing.

Optimizing floor space in lines where space and operator orientation may be restricted, the BEL 505G3 multi-station semi-automatic case former is ideal for packagers looking to further improve ergonomics and case packing efficiency on manual case forming operations.

BEL 505G3 Semi-Automatic Case Former / Case Erector Features & Specs:

• Multiple packing positions
• Provides flexibility to pack from the rear end of the case as well as both sides
• Expanded standard case width range
• Quick and easy to adjust
• Connects to any BEL case sealer, enabling one person to form, pack and seal corrugated cases in a single operation
• Improves safety by eliminating costly repetitive strain injury problems
• Modular design allows for a customized BEL system delivered to you at an off-the-shelf lead time and price

Options

• Adjustable box stand
• A-42 Rotary Accumulation Turntable
• Total Lock Caster Wheels with Extension Adjustment
• Roller Conveyor for Infeed & Outfeed
• Flexible Conveyor
• Spare Parts Kits for Machine Maintenance
• S-10 Packing Conveyor with Programmable Weigh Scale
• ErgoLevel Packing Height Adjustment Option

Components

• 1″ Heavy Duty Acme Screws
• C Channel Aluminum Frame

BEL Advantages
BEL products are ideal for packaging lines that do not warrant full automation because of specific requirements like:

• Frequent case size changes
• Many different case sizes and pack configurations
• Limited floor space
• Manual inspection of the products
• Limited technical staff
• The high price of automated case packers and erectors
• Low volume

WEXXAR BEL 505XL

The BEL 505XL is an oversized semi-automatic case erector and pack station. The design of the BEL 505XL is based upon the highly successful BEL 505 semi-automatic case former, which today can be found operating in countless manual packing lines throughout North America.

Pairing the BEL 505XL Semi-Automatic Case Former with a BEL case sealer enables one person to form, pack and seal difficult, large dimension RSC corrugated cases. The BEL 505XL semi-automatic case former further reduces labor cost by eliminating the need to manually pre-assemble and store cases prior to packing.

The BEL 505XL semi-automatic case former is simple to operate and adjust. Case size changes are made without tools by the operator in less than one minute with easy to use hand wheel settings.

BEL 505XL Semi-Automatic Case Former / Case Erector Features & Specs:

• Runs large dimension RSC corrugated cases
• Case size changes are made without tools in less than one minute
• Connects to any BEL case sealer, enabling one person to form, pack and seal corrugated cases in a single operation
• Improves safety by eliminating costly repetitive strain injury problems
• Modular design allows for a customized BEL system delivered to you at an off-the-shelf lead time and price

Options:
Adjustable box stand
A-42 Rotary Accumulation Turntable
Total Lock Caster Wheels with Extension Adjustment
Roller Conveyor for Infeed & Outfeed
Flexible Conveyor
Spare Parts Kits for Machine Maintenance
S-10 Packing Conveyor with Programmable Weigh Scale
ErgoLevel Packing Height Adjustment Option

Components:

• 1″ Heavy Duty Acme Screws
• C Channel Aluminum Frame

BEL Advantages
BEL products are ideal for packaging lines that do not warrant full automation because of specific requirements like:

• Frequent case size changes
• Many different case sizes and pack configurations
• Limited floor space
• Manual inspection of the products
• Limited technical staff
• The high price of automated case packers and erectors
• Low volume

WEXXAR BEL 505

BEL 505 Semi-Automatic Case Former / Case Erector Features & Specs:

• Connects to any BEL case sealer, enabling one person to form, pack and seal corrugated cases in a single operation
• Improves safety by eliminating costly repetitive strain injury problems
• Modular design allows for a customized BEL system delivered to you at an off-the-shelf lead time and price

Options:
Adjustable box stand
A-42 Rotary Accumulation Turntable
Total Lock Caster Wheels with Extension Adjustment
Roller Conveyor for Infeed & Outfeed
Flexible Conveyor
Spare Parts Kits for Machine Maintenance
S-10 Packing Conveyor with Programmable Weigh Scale
ErgoLevel Packing Height Adjustment Option

Components:

• 1″ Heavy Duty Acme Screws
• C Channel Aluminum Frame

WEXXAR WF 30

WF30 Automatic Case Former / Case Erector Features & Specs:

• Speed: Maximum 30 cases per minute (CPM)
• Size maximum: L: 24 x W: 17 x D: 16.5 Maximum E = 25
• Size minimum (Smaller/Custom sizes available by request): L: 6 x W: 5 x D: 3.5
• Minimum E = 6
• Positive Case Squaring System: Lines up and squares the case during sealing, creating visually appealing case output.
• Single Push Transport System: Combines linear bearing guides with a mechanically adjustable case pusher for case squaring.
• Dekka high performance tape head case closure system is standard
• Precision folded and sealed cases around the clock
• Positive case opening without vacuum easily accepts marginal quality corrugated board
• Large case feed magazine
• Corrosion-resistant, inline construction
• U.L. listed electrical panel
• Simple 10 minute size changeover
• Interlocked safety guarding

ECONOCORP TWINSEAL

Economical carton sealer glues two flaps – size adjustment in minutes

• Carton size range: Min: 3/4 x 3/4 x 3” (19 x 19 x 76mm) Max: 12 x 4 x 12” (305 x 102 x 305m
• Compact
• Speed: Up to 1800 cartons per hour (depending on operator dexterity, carton style, size and other factors)
• Simple operation with minimum moving parts

Sealing Method

Hot Melt Glue

The hot melt glue system is the most popular Twinseal sealing method which minimizes flap compression time and works well with many different board materials and coatings.

Hot Air Sealing

Hot air guns can be used to seal cartons that have either pre-applied adhesive or double sided sealable coatings on the carton board.

Optional Equipment

Hand Crank Lateral Adjustment

The Twinseal with hand crank adjustment was developed specifically for production lines that have multiple carton sizes and must switch back and forth to meet marketing demands. To change over to a new carton size, the hand crank is easily adjusted to the appropriate carton size and locked in position. Changeover time is reduced to minutes and most change parts are eliminated.

Automatic Cycle

The Automatic Cycle option detects a carton in position for sealing and automatically starts the cycle.

Coding (Auto-cycle option required)

Deboss, ink and hot leaf coding systems are available for installation on the Twinseal to meet your specific requirements.

Automated Infeed Systems

Infeed conveyors are available to transport filled packages directly into the Twinseal without the need for an operator to feed loaded cartons directly into the Twinseal.

ECONOCORP E-SYSTEM 2000

Automatic horizontal cartoner for erecting, loading and closing end load cartons

Features

• Sanitary construction (essentially stainless steel)
• Intermittent motion
• Up to 1500 cartons per hour (depending on carton styles and other factors)
• PLC Controls
• Compact 78 x 32” (1980 x 813mm )
• Accommodates glue sealing, tuck closure or hot air closure – Paperboard or corrugated

E-System 2000 – Method of operation

1. End load carton is removed from a supply magazine via vacuum system
2. Carton is erected at a single product load station
3. Product is manually or automatically (optional) horizontally loaded into carton
4. Loaded carton is transported to the closing position for tuck closure or sealing with either hot melt glue or hot air
5. A completed carton is then automatically delivered from the machine to a convenient working height

(Carton Size)
Min 1” x 3/4” x 2 1/2” (25 x 19 x 64mm)
Max 12” x 4” x 12” (305 x 102 x 305mm)

Up to 1500 cartons per hour depending on carton style, and other factors.

ECONOCORP V-SYSTEM

The ECONOSEAL V-System is a mechanically driven, intermittent motion vertical cartoner. Economy, simplicity and compact design are features of this unique machine.

Method of Operation:

A flat, pre-glued end load style carton is pulled via vacuum from the carton supply magazine. The bottom of the carton is closed (tuck or glue methods available) and the carton is then presented (vertically) to the product loading area. There are ac- tually 3 carton stations available in the twenty four (24) inch load area. Following the loading of the product, the machine cycle is initiated and the top of the carton is closed (tuck or glue methods available) and the completed package is discharged from the machine.

Machine Features Include:

• Easy access to carton magazine
• Adjustable 4 chain transport system to enhance carton squareness
• Hand crank adjustment for fast size changeover
• Centrally located twenty four (24”) inch product loading area
• Closure stations (tuck or hot melt extruding systems available)
• Date – lot coding and other options available

Size Range:

Min 1” x 3⁄4” x 2 1⁄2” (25 x 19 x 64mm) Max 8” x 3” x 10” (203 x 76 x 254mm)

Speed:

Up to 40 cartons per minute, depending on carton size and other factors

ECONOCORP SPARTAN

Rugged, Mechanical, Horizontal Cartoner

Features

• Sanitary construction (essentially stainless steel)
• Intermittent motion
• PLC controls
• Up to 2,400 cartons per hour (depending on carton style, size and other factors)

Carton Size

• Min 2”x1”x5” (51 x 25 x 127mm) Max. 10” x 4” x 12” (254 x 102 x 305mm)

Speed

• Up to 2400 cartons per hour depending on carton style, and other factors

ECONOCORP PEGASUS

Continuous Motion Cartoner

Features

• Compact Design
• Variable Speed
• Up to 7,200 CPH (depending on carton size and other factors)
• Glue or Tuck Style Closure
• Broad Carton Size Range
• Simple Carton Size Change
• Optional Automatic Loading
• Stainless Steel Construction

Carton Size

• Min 2 x 1 x 4” (51 x 25 x 102mm) Max 8 x 3 x 12” (203 x 76 x 305mm)

Speed

• Up to 7200 cartons per hour depending on carton size, style, and other factors.

IPAK- TF-100

The IPAK 100 Series of fully automatic tray formers are a compact, higher performance series of machines, specialized in running 4 corner trays or trays with a 1 piece lid. The 100 series is based on IPAK’s compact40x80 platform, perfect for applications with limited amounts of floorspace.

Similar to other IPAK products, it comes loaded with many standard features including a 7” touch screen, interlocked safety guarding, and heavy duty materials for long lasting performance. Size changes can be completed in under 5 minutes with color coded quick size change handles, scribed parts and digital readouts.

IPAK ATL AUTOMATIC VERTICAL TRAY FORMER, SELF LOCKING

WEXXAR’s ATL automatic self-locking tray former offers specialty tray forming for industrial, agricultural, and distribution applications. Designed and built for sustained, heavy-duty applications, the ATL model is highly versatile, reliable and operator friendly. A Human Machine Interface (HMI) touch screen allows operators to monitor and track all ATL functions and provides pictorial, step-by-step instructions on how to resolve tray forming issues. Corrosion resistant construction enables the ATL to withstand the demands of most workplace environments. Options to provide full wash-down protection are also available. State-of-the-art servo motion control forms trays precisely at speeds of up to 35 trays per minute and minimizes machine vibration.

The ATL forms a wide range of self-locking trays.

• Omron HMI touch screen is standard. The graphic interface monitors and tracks ATL operations and alarms with pictorial, step-by-step instructions.
• Precision servo drive for fast, accurate tray forming up to 35 cpm
• “Easy Load” self priming magazine loader (optional)
• 15 minute “Quick Adjust” size changeover (optional)
• Corrosion resistant construction
• All electrical components are UL/ULC recognized, name-brand quality and meet NEC, UL, and NFPA code standards

IPAK ATH AUTOMATIC TRAY FORMER – HOT GLUE CLOSURE

WEXXAR’s ATH fully automatic tray former offers specialty tray forming for industrial, agricultural, and distribution applications. Designed and built for sustained, heavy-duty applications, the ATH model is highly versatile, reliable and operator friendly. A Human Machine Interface (HMI) touch screen allows operators to monitor and track all ATH functions and provides pictorial, step-by-step instructions on how to resolve tray forming issues. Corrosion resistant construction enables the ATH to withstand the demands of most workplace environments. Options to provide full wash-down protection are also available. State-of-the-art servo motion control forms trays precisely at speeds of up to 45 trays per minute and minimizes machine vibration.

The ATH forms Slotted Style Trays, Trays with Outside Flaps, Leak Proof Trays, Econo Trays, Flap Trays, Flange Trays, Bag-in-Box Trays.

• Omron HMI touch screen is standard. The graphic interface monitors and tracks ATH operations and alarms with pictorial, step-by-step instructions.
• Equipped with Nordson brand hot melt glue systems
• Precision servo drive for fast, accurate tray forming up to 45 cpm
• “Easy Load” self priming magazine loader (optional)
• 15 minute “Quick Adjust” size changeover (optional)
• Corrosion resistant construction
• Programmable glue pattern control
• All electrical components are UL/ULC recognized, name- brand quality and meet NEC, UL, and NFPA code standards

IPAK ABH AUTOMATIC BLISS BOX FORMER – HOT GLUE

The Wexxar ABH Automatic Bliss Former represents an industry standard in quality, performance, and safety. The ABH universally forms many types of Bliss boxes, balancing maximum vertical stacking strength with economical use of corrugated.

This consistently accurate machine delivers superb performance and esthetics, thus minimizing damage returns. Equipped standard with Servo motion control, the ABH allows packagers to customize the handling of their Bliss boxes for precision forming at speeds up 25 boxes per minute. The ABH varies speed and adapts itself to the box being formed, easily meeting the needs of more complicated box designs.

ABH Features

ABH machines are built for heavy duty round-the-clock production using the latest in design and manufacturing technology.

• Case Connect – custom variable speeds and glue pattern pre-sets for different tray sizes
• Build your own pre-sets for case sizes and speeds or have the Case Connect System calculate and suggest settings for you
• Compact, vertical design maximizes valuable floor space
• Built-in interlocked safety guarding that meets or exceeds OSHA requirements
• Size change in 30 minutes or less with “Quick Change” option
• High-end tubular, steel construction for added strength
• Servo motion control for fast, accurate box forming
• All electrical components are UL/ULC recognized, name- brand quality and meet NEC, UL, and NFPA code standards
• Equipped with choice of Nordson or ITW Dynatec hot melt system

IPAK RF-100 AUTOMATIC RETURNABLE PLASTIC CONTAINER ERECTOR

IPak’s Model RP-100 fully automatic Returnable Plastic Container erector is designed to form reusable plastic totes used by fresh fruit and vegetable growers, distributors and retailers. Packagers can take advantage of the natural cooling properties of RPCs as well as the economic and sustainable benefits of reusable transport containers. Switching from corrugated trays to more sustainable packaging no longer means sacrificing the economies of automation. The RP-100 machine is designed to securely form RPCs while reducing labor costs and repetitive strain injuries related to forming trays by hand. Reusable transport packaging simultaneously reduces environmental impacts and has the benefit of being washable and reusable, whereas soiled corrugated containers must be discarded and re-ordered. The RP-100 comes standard with a dual Easy-Load infeed magazine that allows 7 stacks of RPC to be primed for production at all times. It will continuously operate at speeds of up to 25 containers per minute and is backed by IPak’s nation-wide service team.

Standard Features

• Dual – Easy Load Six Stack infeed magazine
• Positive tray separation hopper
• Positive “chain plate” tote advance
• Corrosion resistant construction
• Integrated safety guarding
• Two E-stop push button stations
• Remote demand sensor
• UL listed NEMA 12 control panel and enclosure
• Allen-Bradley MicroLogix 1400 PLC
• Omron NS8 Color Touchscreen HMI
• Allen-Bradley PowerFlex 40 inverter
• Operator’s Manual

Method of Operation

Stacks of 20 to 30 knocked-down RPC totes are loaded onto the RP-100 from either side or from the ends onto the magazine. The tote stacks are advanced by the motor driven conveyor chain plate to the dual centering side push- ers. Once the stack is centered they are pushed into the hopper section where one tray at a time is bottom picked pneumatically. The RPC is advanced where the end and side walls are erected and pneumatic pushers secure the locking tabs. The erected tote is then discharged from the machine.

IPAK TF 350CF AUTO TRAY FORMER

The TF-350CF fully automatic tray former automatically forms Euro style rollover or laminated side trays designed for agricultural applications, including Defor, V-Corner (VPS), One Touch, and other similar tray styles as produced by most major corrugators for flat packs of fruits and vegetables. An easy changeover enables the TF-350CF to also form MUB style trays. It continuously operates at speeds of up to 32 trays per minute and is fully adjustable to form various sizes and depths including full and half Common Footprint. Size changes are quick and easy, and can be performed in less than 10 minutes.

Standard Features

• All mechanical drive train
• Easy load hopper
• Piab type vacuum pick system
• Offset dual vacuum cam design
• Quick size change features
• Remote Demand Controlled
• Nordson hot melt adhesive system
• All controls 24 Volts DC
• Allen-Bradley PLC
• Omron HMI
• Fully interlocked safety guarding

IPAK TF 350B AUTO TRAY FORMER

Model TF-350B fully automatic tray former automatically forms B.T.B. style trayssuitable for agricultural, food processing, distribution and many other applications. It will continuously operate at speeds of up to 28 trays per minute and is capable of forming a wide range of tray sizes. Size changes are quick and easy, and can be performed in less than 30 minutes.

Standard Features

• All mechanical drive train
• Easy load hopper
• Piab type vacuum pick system
• Offset dual vacuum cam design
• Corrosion resistant construction
• Remote Demand Controlled
• Nordson hot melt adhesive system
• All controls 24 Volts DC
• Allen-Bradley PLC
• Fully interlocked safety guarding

IPAK TF 260A AUTO TRAY FORMER

The Model TF-260 fully automatic tray former is forms six-corner, one-piece telescoping trays, where all six minor flaps are formed and glued. This tray style is ideal for applications requiring full product protection and superior stacking strength, such as meat and poultry processing and distribution. It will continuously form six-corner trays at speeds of up to 25 trays per minute depending on tray size and specification. Various standard frame sizes are available to enable the TF-260 to form a wide range of tray sizes. Size changes are quick and easy, and can be performed in less than 20 minutes.

Standard Features

• All mechanical drive train
• Easy load hopper
• Piab type vacuum pick system
• Offset dual vacuum cam design
• Corrosion resistant construction
• Remote Demand Controlled
• Nordson hot melt adhesive system
• All controls 24 Volts DC
• Allen-Bradley PLC
• Fully interlocked safety guarding

IPAK TF 200Q AUTO TRAY FORMER

IPak’s Model TF-200Q fully automatic tray former is designed and built to withstand the rigors of continuous, heavy-duty, industrial applications. The TF-200Q will form regular slotted trays in various configurations including four corner glued trays, one and two piece telescoping trays, and variations of self-locking trays suitable for most any application including agricultural, food processing and distribution. It will continuously operate at speeds of up to 35 trays per minute and is capable of forming a wide range of tray sizes. Size changes are quick and easy, performed in less than 10 minutes due to its quick size change features.

If your application requires specialty or complex tray styles, consult your factory representative regarding IPak’s TF-200 Series of specialty tray formers. Like all IPak machinery, the TF-200Q is known for reliability and dependability and is backed by IPak’s friendly and knowledgeable service team.

Standard Features

• All mechanical drive train
• Easy load hopper
• Piab type vacuum pick system
• Offset dual vacuum cam design
• Quick size change features
• Corrosion resistant construction
• Remote Demand Controlled
• All controls 24 Volts DC
• Programmable Controller
• Fully interlocked safety guarding

IPAK TF 200T AUTO TRAY FORMER

The TF-200T fully automatic tray former is built to withstand the rigors of continuous, heavy-duty, industrial applications. Utilizing a revolutionary forming process that forms triangulated corner posts on the downward stroke of the mandrel, the TF-200T will form triangulated corner and other specialized corner post style trays suitable for most any application including agricultural, food processing and distribution. It will continuously operate at speeds of up to 30 trays per minute and is fully adjustable to form a wide range of tray sizes.

IPAK TF-200DQ AUTO TRAY FORMER

IPak’s Model TF-200DQ fully automatic dual tray former is designed and built to withstand the rigors of continuous, heavy-duty, industrial applications. The TF-200DQ will form regular slotted trays in various configurations including four corner glued trays, one and two piece telescoping trays, and variations of self-locking trays suitable for most any application including agricultural, meat packing, food processing and distribution. The two sides of the machine produce trays simultaneously, however each side of the machine operates independently of the other, thereby allowing one side to operate while the other is being adjusted to run a different size or configuration of tray.

The TF-200DQ will continuously operate at speeds of up to 35 trays per minute per side and is capable of forming a wide range of tray sizes. Size changes are quick and easy, performed in less than 10 minutes. Like all IPak machinery, the TF-200DQ is known for reliability and dependability and is backed by IPak’s professional service team.

IPAK TF-200 AUTO TRAY FORMER

The TF-200 fully automatic tray former is designed and built to withstand the rigors of continuous, heavy-duty, industrial applications. It forms regular slotted trays in various configurations including four corner glued trays, one and two piece telescoping trays, and various self-locking trays suitable for most any application including agricultural, food processing and distribution. It will continuously operate at speeds of up to 35 trays per minute and is capable of forming a wide range of tray sizes. Size changes are quick and easy, performed in less than 10 minutes.

IPAK TF300-CT AUTO TRAY FORMER

The TF-300CT forms column case, or L-corner post, style trays. Whether for agricultural, food processing, distribution, retail display or any other application, the TF-300CT can form standard corner post trays or specialty trays with top flaps, stacking ledges, corner caps, display openings, etc. It will continuously operate at speeds of up to 30 trays per minute and is capable of forming a wide range of tray sizes. Size changes are quick and easy, and depending on tray style can be performed in about 20 minutes. Like all IPak machinery, the TF-300CT is known for reliability and dependability and is backed by IPak’s friendly and knowledgeable service team.

The automatic tray former TF-300CT is an all mechanical drive train. With an easy load hopper and the fully interlocked safety guarding, the TF-300CT ensures quality and durable machinery. Also included are the venturi type vacuum pick system and the nordson hot melt adhesive system, an offset dual vacuum cam design, and the Allen-Bradley PLC.

Time efficiency is an important aspect of the TF-300CT. As all controls are 24 Volts DC and with speeds of up to 30 trays per minute, this automatic tray former is designed to give you the most in the shortest amount of time.

EAGLE POPLOK

POPLOK SELF LOCKING TRAY ERECTOR

EAGLE’S POPLOK Tray Erector can form corrugated or paperboard blanks into trays with NO GLUE.

Increase throughput while eliminating repetitive motion and worker’s comp issues with the POPLOK. Fold & tuck trays are easier on the environment and less expensive to recycle than glued or taped containers. The POPLOK will from large or small blanks, with or without a lid, from 1 tuck to multiple tucks.

EAGLE VASSOYO AIR

VASSOYO AIR PNEUMATIC TRAY ERECTOR Vassoyo Air automatically erects and glues virtually any type of tray, whether it is a Citrus, Produce, Bliss, Showcase or many other tray designs.

Designed for quick changeover in a compact footprint.

EAGLE VASSOYO

The VASSOYO ALL MECHANICAL TRAY ERECTOR model is a high speed, heavy-duty mechanical tray former for many styles of glued trays, with or without a lid.

Designed for speed and quick changeover in a compact footprint.

HCE

As a specialist in the case erecting industry, Combi is constantly incorporating new technology into our impressive portfolio of equipment. The mechanical design Combi HCE offers high speed case erecting up to 35 cpm while achieving efficiencies in power and air usage and reduced overall machine size. Capable of erecting and sealing cases with adhesive tape or hot melt glue, the easy to use Combi HCE is built with heavy-duty mechanical components and rugged welded tubular steel construction for 3-shift reliability.

COMBI DPI DROP PACKER

Whatever your product, from shrink wrapped bottles to 2 gallon jugs, the Combi DPI Drop Packer is your productivity solution. The Combi DPI Drop Packer features a simple brake and gate system for case indexing with no wear parts for maximum uptime. An innovative powered case discharge prevents case-to-case contact after the product is packed. Four points of contact on the case lift and our exclusive soft drop technology support and cushion cases on the up and down strokes. Setup and changeovers are simple and fast with our modular, slide-in packing heads and quick-clamp product lane guides. A recent feature is our custom programmed “States Screens” displayed on the operator interface which offers quick diagnostics and provides feedback on productivity. Troubleshooting is reduced to mere seconds and production can be monitored by product, operator or shift with this Combi designed software.

COMBI DP DROP PACKER

With over 35 years of design and innovation, the Combi DP Drop Packer continues to evolve into one of the in- dustry’s most reliable and robust case packing machines. Built into the strongest frame and resulting in one of the smallest footprints in the industry, is a convenient walk-in case magazine and case erector. Setup and change- overs are simple and fast with our modular, slide-in packing heads and quick-clamp product lane guides. A recent feature is our custom programmed “States Screens” displayed on the operator interface which offer quick diagnostics and provide feedback on productivity. Troubleshooting is reduced to mere seconds and production can be monitored by product, operator or shift with this Combi designed software.

2-EZ XL SERIES

Combi Packaging System’s heavy duty side belt drive case erectors form and bottom seal large and extra large cases at speeds up to 10 cases per minute. These machines are built for optimal durability, reliability, and value. Engineered with the industry’s strongest frame (lifetime warranty) for the most demanding 3-shift environments, the 2-EZ XL, 2-EZ XL HS, and 2-EZ XXL can readily integrate into your existing line. Combi’s user-friendly EZ-load walk-in case magazines and 2-minute changeover system are standard features. The redesigned 2-EZ XL series case erectors will provide years of dependable service and can form and seal the widest variety of large cases, from single wall to triple wall corrugated.

2-EZ XL Series Standard Features:

• Large case capabilities up to 10 cases per minute
• EZ Load Walk-In Gravity Case Magazine (2-EZ XL) or Powered Case Magazine with Motorized Magazine Elevation (2-EZ XL HS, -XXL)
• Heavy-duty Welded Steel Construction with Epoxy “Steel It” Paint
• 3M Accuglide Tapeheads
• Allen-Bradley components
• Dual Belt Driven (2-EZ XL and 2-EZ -XXL) or Servo Driven (2-EZ XL HS) Carriage Assembly
• Self-Cleaning Vacuum System with Air Purge
• Safety Back-Up Photo Eye with 20’ Cord and Mounting Bracket
• Right Hand or Left-Hand Execution

2-EZ HS/ 2-EZ SB

Combi Packaging Systems is raising the bar for case erecting innovation with our high-speed, side belt drive case erectors. Engineered with the industry’s strongest frame (lifetime warranty) for the most demanding 3-shift environments, the 2-EZ®SB and 2-EZ HS can readily integrate into your existing line at speeds up to 35 cpm. The 2-EZ side belt drive units are designed for years of dependable service and can form and seal the widest variety of cases, from single wall to triple wall corrugated. With features that contribute to lowering your cost of ownership, Combi high-speed case erectors have never been easier to maintain and operate.

Design Enhancements:

• Adjustable carriage stop design provides faster speeds and case size range
• No overhead cross members in doorways provides easy access for maintenance
• Hinged case hold-down plate allows for easy tape head removal
• Only 5 adjustment points with digital indicators – the tape head and side belts adjust together
• Positive four flap closing – rotary actuators and a fixed guide close the major flaps, which provides for smooth, gradual closing of the major flaps.
• Overall footprint reduced 8” freeing up valuable floor space
• Incorporated Piab vacuum generator at the cup results in half the amount of energy consumed
• Electrical enclosure now with 35% more panel space, allowing for future integration of conveyor and other optional equipment

HIGH SPEED DP

The well proven capabilities of the Combi DP Drop Packer have been enhanced with a higher level of efficiency. Integrated into the frame of this state-of-the-art case packer is the efficient Combi 2-EZ® SB or 2-EZ® HS high speed case erectors. Now an even larger variety of product sizes, shapes, weights and materials can be quickly and easily packed in large cases at speeds up to 30 cpm, while still maintaining a compact footprint. As with all our drop packers, adjustable lane guides can be quickly and easily reconfigured, giving the user the flexibility to pack multiple products on the same line.

2-EZ HS RH LH

Do you use a variety of corrugated cases with different print orientation? Up until now, in most facilities, these are erected and sealed manually or requires multiple case erectors – one to erect right-handed cases and one to erect left-handed. Now Combi Packaging Systems LLC provides users the flexibility of owning just one machine that erects both hands, thereby freeing up valuable floor space and requiring a minimal staff to operate and maintain the case erector. This machine is ideal for contract packaging operations and fulfillment centers.

Design Features:

• Opposite hand case modification includes a servo-controlled squaring arm mount that self-adjusts through a menu setting on the operator interface
• No overhead cross members in doorways provides easy access for maintenance
• Hinged case hold-down plate allows for easy tape head removal
• Only 5 adjustment points with digital indicators – the tape head and side belts adjust together
• Positive four flap closing – rotary actuators and a fixed guide close the major flaps, which provides for smooth, gradual closing of the major flaps.
• Self-cleaning vacuum system with vacuum generator consumes conservative amount of air
• Large electrical enclosure allows for future integration of conveyor and other optional equipment

COMBI CE-10

Instant Productivity

The Combi CE-10 is an automatic system that erects and bottom seals corrugated cases at speeds from 500 to 700 cases per hour. This value-priced case erecter is ideal for applications that require more throughput than manual case erecting can provide. This versatile system creates instant labor savings and increased production for a wide range of medium-speed applications. With industry-leading standard features like low-case and low-tape alarms, powered case magazine and fast no-tool changeovers, the CE-10 is a simple, operator-friendly solution for your packaging line.

Standard Features

• High-capacity powered case magazine holds 150-200 cases
• Small footprint design minimizes floor space Standard low case & low tape alarms with stack light assure continuous operation Safety interlocked guarding restricts access to moving part
• 2 inch 3M Accuglide 3 Tapehead
• 12 case per minute operation for medium speed packaging lines
• CE international certification

2-EZ HM/2-EZ HS HM

For optimal durability, reliability and value, the Combi 2-EZ® HM and 2-EZ® HS HM are your clear choice for case erecting and bottom sealing with hot melt glue. Built with the industry’s strongest frame (lifetime warranty) for the most demanding 3-shift environments, these case erectors readily integrate into your existing line. The systems’ design featuring Combi’s EZ-load walk-in case magazine, Nordson ProBlue Glue Unit and quick changeover system assures minimal downtime and years of dependable service. As all Combi 2-EZ® case erectors, these versatile machines can form and seal the widest variety of cases, from single wall to triple wall corrugated. Add the Combi 2-EZ® HM to your line for instant productivity.

COMBI DP DROP PACKER WITH INTEGRATED CASE ERECTOR

Combi Dp Drop Packer With Integrated Case Erector The Combi Dp Drop Packer With Integrated Case Erector Automatically Erects And Packs A Wide Variety Of Products Into Cases Up To 24” Long By 16” Wide By 24” High In Pack Patterns Of 2 By 1 To 12 By 8.

COMBI HL AUTOMATIC CASE PACKING SYSTEM

Combi Hl Automatic Case Packing System The Combi Hl Is A Compact System That Automatically Orients, Collates And Packs A Wide Range Of Products In To Cartons Up To 30” Long By 20” Wide By 32” High At Speeds Of Up To 12 Cases Per Minute.

COMBI EXPRESSPACK ECONOMY HAND PACK STATION

Combi Expresspack Economy Hand Pack Station The Combi Expresspack Combines A Combi Ce-10 Case Erector, A Custom Hand Pack Station And A 3M-Matic 120Af Case Sealer Into A Cost Effective Work Cell That Handles Cases 8” To 17.5” Long, 6” To 13.5” Wide And 5” To 20” High.

COMBI HL350-SA SEMI-AUTOMATIC HORIZONTAL LOADER

Combi Hl350-Sa Semi-Automatic Horizontal Loader The Combi Hl350-Sa Is The New Compact Solution For Automatically Collating And Packing Products Into Rsc Cases 13” To 24” Long, 7.75” To 16” Wide And 12” To 24” High At Speeds Of Up To 8 Cases Per Minute.

COMBI ERGOPACK HAND PACK STATION

Combi Ergopack Hand Pack Station The Combi Ergopack Combines A Case Erector, A Handpack Station, And A Sealer Into A Compact And Cost-Effective Workcell For Up To 3 Operators And Cases Up To 24” Long By 16” Wide By 24” Long.

Features

• Lifting of products significantly reduced, resulting in few back injuries and discomfort
• Reduces costly physical stressors associated with manual case erecting, hand packing and sealing
• Ideal for short runs – quick case changeovers
• ROI under 6 months, in most cases

COMBI 2-EZ CASE ERECTOR

Combi 2-Ez Case Erector The Combi 2-Ez Erects And Bottom Seals Cases 6” To 20” Long, 4.5” To 16” Wide And 4.5” To 18” Long At Speeds Of Up To 12 Cases Per Minute. The 2-Ez Plus Will Handle Cases Up To 24” Long.

Features

• Erects large cases up to 20″ wide
• Heavy duty 2″x3″ welded tubular steel framework
• Easy load case magazine
• 3″ to 6″ 3M Accuglide II Tapehead

COMBI TF 2 FAST TRAY FORMER

The TF-2 is a perfect solution for forming and gluing die cut trays. The TF-2 fast tray former is a simple, intelligent and very compact system that utilizes the same transport mechanism as our E-series case erectors. The TF-2 tray former machine features a low-profile, gravity walk-in case magazine that makes it very easy to load trays. Only 4 easy adjustments are required for fast tray changeovers. A computer controlled glue application system applies glue precisely to the tabs at measurable intervals, creating a very square and securely glued tray, every cycle.

Tray Former Machine Features:

• Heavy duty welded tubular steel framework with steel-it paint finish – Lifetime Warranty
• Easy changeover with pre-set mandrels and only 4 crank adjustments
• Nordson ProBlue hot melt glue unit with precise temperature control and energy saving timer
• Easy to load, gravity tray magazine
• Self-cleaning vacuum system flushes the vacuum system every cycle, preventing corrugated dust buildup
• Self-cleaning glue guns keep glue patterns tight and on target
• Allen Bradley PLC control with touch screen operator interface

See what a difference a machine can make when automatically forming die cut trays with our compact fast tray former! This tray forming machine produces perfectly square, glued trays every cycle.

For more information on tray formers, fill out this form or call us at 1.800.521.9072.

COMBI HCE

As a specialist in the case erector industry, Combi is constantly incorporating new technology into our impressive portfolio of equipment. The mechanical design Combi HCE case former offers high speed case erecting up to 35 cpm while achieving efficiencies in power and air usage and reducing overall machine size. Capable of erecting and sealing cases with adhesive tape or hot melt glue, the Combi HCE bottom case sealer is built with heavy-duty mechanical components and rugged welded tubular steel construction.

Features

• Up to 35 cases per minute
• Powered case magazine holds up to 450 cases
• Dual belt drive case indexing
• Positive case opening with opposing vacuum
• Positive mechanical four flap closing
• Low maintenance AC drive motors
• Heavy duty welded tubular steel construction
• Safety interlocked guarding
• Allen Bradley components
• 1 year comprehensive machine warranty on non-wear parts

LANTECH C2000 CASE ERECTOR

Lantech Case Erectors create “good packages” by squaring up the case (90 degree corners) where the bottom flaps meet evenly without overlapping, and the sealing tape is applied evenly and has equal “legs” on the side of the box.

Cases that aren’t “square” are hard to pack, resist going through automatic sealers, don’t stack well (hard to align – stacking strength comes from corner alignment), and don’t look good. Our case erectors make square cases because:

1. The pickup frame provides two-panel control of the case as it transitions from knock-down to open position.
2. Unique slotted flap folders fold the major flaps while the case is stationary.
3. The minor flaps are also folded while the case is stationary.
4. Industry’s best service network and call center

You can rely on Lantech Case Erectors because they don’t jam! Jams are the number one cause of downtime for case erectors.

1. Powered magazine consistently delivers blanks to proper pickup (feed) position.
2. Pickup frame provides positive control of case and overcome manufacturing variations in the cases.
3. All flaps are folded while the case is held square by the pickup frame and before it moves into the side belts.

Lantech Case Erectors erect and seal a wide variety of applications which include:
-HSC and RSC cases
-B and C flute
-single wall

LANTECH C300 CASE ERECTOR / CASE FORMER

Lantech case erectors always open your cases squarely, fold the flaps without overlapping where they meet at the middle, and apply the tape securely and evenly along the bottom centerline.

Our case erectors make square cases because:
1. The unique case pickup frame provides two-panel control of the case as it transitions from knock-down to open position.
2. The minor flaps are also folded while the case is stationary.
3. Unique slotted flap folders fold the major flaps while the case is stationary.

Cases that aren’t square are more difficult to fill manually, and can be impossible to fill with automatic packers. They resist going through automatic sealers, increasing the frequency of disruptive line stoppages. They are difficult to align properly at the corners when stacking, often resulting in a hazardous loss in stacking strength.

LOVESHAW SP-304R BO, BOTTOM ONLY CASE FORMER

BOTTOM-ONLY – RANDOM CASE FORMING
Loveshaw, celebrating 50 year of Innovation, Quality and Integrity, is proud to release the latest in a series of industrial grade high performance case sealers.

The Little David®SP-304R BO incorporates an anvil pack table station. This provides a table that allows the operator to form the box before sealing the bottom. Random side belt drives positively drive the box through the folding area and over the tape cartridge for a consistent bottom seal. The patent-pending CaseLocker 60 tape cartridge features tool-less quick release wipe rollers and knife blade.

FEATURES OF THE SP-304R INCLUDE:

• Improve productivity and throughput by maximizing operator efficiency
• Eliminate ergonomic risk factors by reducing operator fatigue and repetitive motion syndrome.
• Extensive box range, movable control station, and easy access motors, electrics and belts
• The SP-304R BO Semi-Automatic Random Case Former, combined with the CaseLocker 60 tape cartridge, is an ideal machine for erecting and bottom-sealing random cases for those utilizing a variety of box sizes.
• Replaces hand taping boxes
• Case Capacity:
  Length: 8” – max. based on anvil
  Width: 4.5” – 20”
  Height: 3.5” – infinite
• Processes 32 ect single wall to 44 ect double wall boxes

LOVESHAW CF-5 STAINLESS ERECTOR/CASE FORMER

Case Forming for the Real World
Loveshaw now offers the CF-5 in stainless steel. This semi-automatic case former is ideal for harsh environments and wash down applications. It features the same ergonomic design and box range as the standard Cf-5. It is PLC driven and requires no lubrication. Slide and lock legs adjust to meet most conveyor heights.

• PLC driven
• Slide and lock legs
• Large box range
• No lubrication required
• Ergonomic design
• Heavy duty steel construction
• Works with virtually any sealer

SPECIFICATIONS:

POWER REQUIREMENTS:

• 110 VAC, 60Hz, single phase, 2 Amps
  Note: Other voltages available. Contact Loveshaw for details.

AIR REQUIREMENTS:

• 6.5 SCFM

PRODUCTION RATE:

• Up to 6 cases per minute, depending on operator dexterity

CASE DIMENSIONS:

• Length: 8″ – 25″ (203mm – 635mm)
• Width: 5.5″ – 20″ (140mm – 508mm)
• Height: 3.5″ – infinite (89mm – infinite)

LOVESHAW “LITTLE DAVID” CF-50T AUTOMATIC CASE FORMER

Case Forming for the Real World
The CF-50T expands the Little David line of high performance case formers developed by Loveshaw, an ITW company. This innovative machine has been designed to automatically form, fold, and bottom seal RSC corrugated cases. The CF-50T easily folds a variety of corrugated cases – from double wall to recycled material, and can form up to 20 cases per minute.

The Little David CF-50T with its heavy duty steel construction is designed to endure the most rigorous industrial environments. The CF-50T requires minimal operator training; decreasing your operating costs, while improved tool-less changeover features make it easier than ever to switch from one box size to another. The CF-50T is designed with your needs in mind. Not only, is the Little David CF-50T the highest quality case former in the industry; but it is also the most cost effective.

• Chain-lug drive
• Powered hopper
• Pneumatic tuckers
• Allen Bradley PLC
• Quick changeover
• Heavy duty steel construction
• American craftsmanship

SPECIFICATIONS:

POWER REQUIRED

• 110 Vac, 60Hz, single phase, 10 Amps
  Note: Other voltages available. Contact Loveshaw for details.

AIR REQUIREMENTS:

• 11 SCFM @ 80 psi.

TAPE SPECIFICATIONS:

• Any commercially acceptable brand of pressure sensitive tape.
• Width: 1-1/2” (38mm) to 2” (51mm); 3” (76mm) optional.
• Tape Roll Diameter: 15” (381mm) maximum on a 3” (76mm) core.
• Roll Length: up to 2000 yards (1829mm).

PRODUCTION RATE:

• CF-50T: up to 20 cases per minute, depending on case size and corrugated quality. Standard: 14cpm.

CORRUGATED ORIENTATION:

• Printing on case and fold orientation must match footprint of the machine.

CASE DEMENSIONS:

• Length 7” to 24” (177mm to 610mm)
• Width 6” to 16” (152mm to 406mm)
• Height 4” to 20” (102mm to 508mm)

WEIGHT:

• 1000 lbs (453.6 kg), uncrated.

STANDARD DISCHARGE HEIGHT:

• 23 1/4 inches (50.7 cm).

LOVESHAW CF-5 CASE ERECTOR/CASE FORMER

Loveshaw now offers a semi-automatic case former. This low-cost machine has an ergonomic design and accommodates a wide range of boxes. The CF-5 is PLC driven and requires no lubrication. Slide and lock legs adjust to meet most conveyor heights. Attachment kits are in stock for the LD-7, SP-304, and Uniform Legend. There is also a universal mounting kit available for other case sealers in the industry.

POWER REQUIREMENTS:

• 110 VAC, 60Hz, single phase, 2 Amps
  Note: Other voltages available. Contact Loveshaw for details.

AIR REQUIREMENTS:

• 6.5 SCFM

PRODUCTION RATE:

• Up to 6 cases per minute, depending on operator dexterity

CASE DIMENSIONS:

• Length: 8″ – 25″ (203mm – 635mm)
• Width: 5.5″ – 20″ (140mm – 508mm)
• Height: 3.5″ – infinite (89mm – infinite)

LOVESHAW CF-25 CASE ERECTOR / CASE FORMER

Loveshaw CF-25 Case Erector / Case Former Specs:

• The CF-25 is the latest in a series of industrial grade, high performance case erectors from Little David. This case erector is designed to form and bottom-seal corrugated boxes at speeds up to 15 cases per minute.
• Small Footprint – Patented case flow technology allows the CF-25 to maintain it’s versatility without compromising your floor space.
• Reliable Case Transfer – Improved case transfer system features upgraded vacuum system and (3) vacuum cups
• Chain and Lug Drive – Chain and Lug drive system ensures a square box is formed and eliminates box stalling and slipping seen in side-belt machines.
• Quick/Easy Changeover – Load-on-the-fly/easy load hopper ensure box loading and changeover are simple and efficient.