Wexxar’s Model WF2T case formers are versatile and industry-proven machines with unique mechanical case forming and bottom flap folding technology. Offering maximum flexibility and performance within a broad range of styles and sizes, these are machines available with a choice of options to meet your own specific requirements. Wexxar WF2T features include: Dekka high performance tape head, Pin & Dome system, large case feed magazine, corrosion-resistant construction, U.L. listed electrical panel, simple 10-minute size change-over, interlocked safety guarding.
- Automatic case former with tape sealing
- Integrated safety guarding with keyed interlock switches.
- Compact, in-line design; highest quality, widely available hardware Unmanned operation – remote demand control
- Case opening without vacuum; WEXXAR patented technology High capacity case feed magazine
- All case feeding and forming functions independently air operated Positive case squaring and flap alignment
- Cases formed and delivered upright
- Broad case size range, easy set-up, operation and care
- Aluminum, stainless steel and plated steel; entirely corrosion resistant
- Discharge at absolute minimum 23 in. (584 mm). With leveling pads, the range is 24 in. (610 mm) to 28.5 in. (724 mm)
- Case magazine at 29 in. (736 mm) at minimum discharge – comfortable loading height
- NEMA 12 UL/CSA listed standard electrical control
- Meets N.F.P.A.-79 standard
- 24 volt DC power supply built in for safe, low voltage operating controls PLC operated sequence and timing control
- 230VAC, 3 Phase, 60Hz (other voltages available) 0.7 kVA, 10 AMP minimum service
- 0.2 cu. ft. (5.6 L) per cycle at 90 p.s.i.(6 bar)
- Up to 25 c.p.m. depending on case size and case quality Available “high speed mode” to 30 c.p.m
- DEKKA Model WEX-22 tape applicator head Other makes optional
- R.S.C., H.S.C. or C.S.S.C. For other styles consult your WEXXAR representative
- Approximately 10 – 15 minutes
