Show Nav

SMIpack:FP series

Modularity and excellent price/quality ratios are the main features characterizing the manual, semiautomatic and fully automatic sealers of the FP series. All the models of this range can indeed be supplied with or without shrink tunnel.

Compared to the traditional L-sealing hood packers, the FP series provides higher outputs as well as the possibility of using Polyethylene film, besides the traditional shrink films.

The FP series of modular sealers with shrink tunnel includes different models, for outputs ranging up to 6.000 packs/hour.

 

Advantages – FP560

  • Manual sealing system
  • Double hood hold-down electromagnet, that highly reduces the pressure of the operator on the sealing arm so as to ensure a better sealing
  • Pack deviation device
  • PTFE-coated sealing blade
  • Closed-circuit liquid cooling of the sealing bars
  • Viewer of the coolant level
  • Working height of the sealer and of the tunnel adjustable by means of an external crank
  • Mobile product-holding plate, loose from the film reel support to allow a better adjustment of the film to the pack size
  • Emergency button
  • Automatic pack discharge by means of a motorized conveyor
  • Flextron® control system equipped with:
    • alphanumeric LCD control panel provided with a 16-bit microprocessor card and solid state relays
    • modular power section, separated from the control panel and characterized by:
      • longer-lasting solid state relays providing easier maintenance
      • in case of failure, possibility of replacing just the damaged module, without losing the data stored in the memory
    • This system allows a simple and precise control of all the machine operations, such as:

      • machine status
      • number of packs produced by an electronic pack counter
      • adjustment of the sealing temperature
      • pack discharge speed
      • delay in the opening of the sealing arm
      • possibility of scheduling up to 10 different work cycles, thus resulting in increased productivity and simplified use
      • troubleshooting
  • Reduced power consumption
  • Compliance with CE regulations
Technical data – FP560
Power supply 220 – 240 V
1PH – N – PE
50/60 Hz
Installed power 2450 W
Sealing bar 560 x 430 mm
Maximum pack height 230 mm
Average output per hour up to 800 pph **
Maximum size of film reel 600 – ø 300 mm
Machine size 2010 x 790 mm
h 1050 mm
Machine net weight 129 Kg
Usable Films: Pvc, Polyolefins and Polyethylene up to 50 µ

(**) the stated speed can change according to the product size, the pack collation and the type of film used

JOIN OUR NEWSLETTER TO GET THE INSIDE SCOOP

Industry information, new products, cost saving tips, and equipment specials

Get inspired. Begin your journey
to packaging greatness today.
1-888-604-5185CONTACT US